Target LRC 100 Manual - page 8
8
ligning the transponder
It is of great importance to correctly align the transpon-
der. This applies to both the vertical and the horizontal
positions (see figure 6).
Vertical: Upward / downward. Ensure that the vehicle is
level. For the adjustment of the vertical position use the
spirit level supplied. Hold this with one of the ends at
right angles to the lens of the transponder and screw the
bracket in position when the correct alignment has been
reached (see figure 1).
Horizontal: Left / right. The mounting brackets included
provide you with the possibility to aim the transponder
to the left or to the right. The transponder must be fixed
at right angles to the long axis of the vehicle.
To achieve vertical and/or horizontal alignment it may
be necessary to bend the fixing brackets used slightly to
obtain an optimum result.
TARGET LRC 100 conversion table for
the installation of the transponder
Use the following conversion table when mounting the
transponder in the grille or behind a ventilation opening
in the vehicle. Mounting with the aid of these parameters
guarantees maximum performance of the TARGET LRC 100.
Cross-section of the laser beam increases
with increase in distance D
grill/vent
opening
Minimum height H
6
8
9
10 11 13 14 15 16 18
Minimum width B
16 18 21 23 26 28 31 33 36 38
Maximum depth D
0
12 24 36 48 60 72 84 96 108
Minimum height H
19 20 21 23 24 25 26 28 29 30
Minimum width B
41 43 46 48 51 53 56 58 61 63
Maximum depth D
120 132 144 156 168 180 192 204 216 228
Minimum height H
32 33 34 35 37 38
Minimum width B
66 68 71 74 76 79
Maximum depth D
240 252 264 276 288 300
Dimensions in millimetres
figure 7
figure 6
230089 LRC 100 Handl EN 04-03-2003 13:20 Pagina 8