Targus Wireless Multi-Channel Mouse User Manual - Troubleshooting
of
15
10
Targus Wireless Multi-Channel Mouse
Troubleshooting
What do I do if the mouse does not work?
• Make sure that the mouse is fully charged.
• Verify that your computer’s power management feature is
turned off.
• Check that the receiver’s USB connector is firmly attached
to the USB port on your computer.
• Make sure you have established a radio link between the
mouse and its receiver. See “Establishing a Communications
Link” on page 4.
Batteries
1 internal lithium polymer
Operating Current
Mouse:
35mA or lower
Receiver:
30mA (typical) (100mA maximum)
Mouse Standby
Current
4.5 mA (for 30 seconds of non-operation)
Mouse Flash Mode
Current
Below 2.8mA (for 20 minutes of non-
operation)
Mouse Sleep Mode
Current
Below 8µA
Modulation Type
FSK
Transmission Rate
5K bps
Transmission Type
Digital radio frequency
Error Detection
8-bit CRC