Tarheel Antennas 400A Instruction Manual

Manual is about: Continuous Coverage HF Antenna

Summary of 400A

  • Page 1

    Proudly made in the united states of america tarheel antennas, inc. Instruction manual for the model 400a continuous coverage hf antenna 18511 cr 304 st. Joseph, mo 64505 816-671-9409 / 816-364-2619 fax e-mail: sales@tarheelantennas.Com technical support 919-552-8788 e-mail: tarheelantennas@aol.Com ...

  • Page 2

    Thank you for purchasing the model 400a tarheel antenna packing list for model 400a model 400a antenna 6 ft. Stainless steel whip up/down switch 20 ft. Control cable ferrite core fuse holder & fuse 1 tube of dielectric compound manual packing list for model 400a package all of the above - - plus the...

  • Page 3

    Picture 1 – mt-1 & mt-30fb installation before installation of this antenna there are a few things you have to consider. To get peak performance you need to try to mount the antenna in a location where the decoupler (this is where the coil comes out of the antenna) is at least as high as the highest...

  • Page 4

    The mt-1 antenna bracket is designed to make your antenna mounting convenient and incredibly strong. Made to clamp to standard 1” pipe (1.312 od) or bolted to a flat surface. (picture 6) there are a few steps to make sure you install the mt-1 antenna bracket the way it is intended. First you need to...

  • Page 5

    Included with the antenna is a special mix #31 ferrite core that needs to be mounted on the control wire as close to the antenna as possible. Loop the wire through the choke at least 3 times. (picture 11) it is used to decouple the control cable from the antenna. If you fail to install this ferrite ...

  • Page 6: Ch-1 -- Capacitance Hat

    Now you need to install the top whip whip length versus frequency coverage 4 ft. -- 1.8 mhz to 30.0 mhz 5 ft. -- 1.7 mhz to 28.0 mhz 6 ft.-- 1.6 mhz to 26.0 mhz 8 ft.-- 1.5 mhz to 20.0 mhz 12 ft.-- 1.2 mhz to 15.0 mhz ch-1 -- capacitance hat hat only -- 1.8 mhz to 30.0 mhz hat with 3 ft. Whip – 1.6 ...

  • Page 7: Relative Tuning Positions

    Relative tuning positions the following photos will show you relative tuning positions of the model 400 tarheel antennas. Lexan cover removed for clarity model 400 -- full down position with 5 ft. Whip -- 28.0 mhz model 400 -- 21.2 mhz with 5 ft. Whip do not try to twist or turn the bug shield on th...

  • Page 8

    Model 400 -- 14.2 mhz with 5 ft. Whip and 1/2" of coil showing model 400 -- 7.1 mhz with 5 ft. Whip and 1 1/2" of coil showing model 400 -- 3.9 mhz with 5 ft. Whip and 4" of coil showing model 400 -- 3.5 mhz with 5 ft. Whip with 5" of coil showing model 400 -- 1.9 mhz with 5 ft. Whip and 15" of coil...

  • Page 9: Maintenance

    Maintenance very little maintenance is required for your tarheel antenna. You should have years of trouble free service from this antenna. You've made a large investment for a mobile antenna. Here is a tip to help take care of your investment. We use an automotive finish on this antenna so whenever ...