Summary of CD-6010
Page 1
D01168520b cd-6010 cd player owner's manual.
Page 2
2 tascam cd-6010 important safety instructionsv caution: to reduce the risk of electric shock, do not remove cover (or back). No user- serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to aler...
Page 3: Safety Information
Tascam cd-6010 3 safety information rack-mounting the unit ª use the supplied rack-mounting kit to mount the unit in a standard 19-inch rack, as shown below. Remove the feet of the unit before mounting. Note leave 1u of space above the unit for ventilation. • allow at least 10 cm (4 in) at the rear ...
Page 4: Safety Information
4 tascam cd-6010 safety information ª cautions about batteries this product uses batteries. Misuse of batteries could cause a leak, rupture or other trouble. Always abide by the following precautions when using batteries. Never recharge non-rechargeable batteries. The • batteries could rupture or le...
Page 5: Contents
Tascam cd-6010 5 contents 1 – introduction ..............................................7 features ..................................................................................7 included items .....................................................................7 about this manual ...............
Page 6: Contents
6 tascam cd-6010 contents checking the firmware version ....................................35 digital output format setting ......................................35 analog output attenuation ...........................................35 using the parallel connector ....................................
Page 7: 1 – Introduction
Tascam cd-6010 7 1 – introduction thank you very much for purchasing the tascam cd-6010 cd player. Before connecting and using the unit, please take time to read this manual thoroughly to ensure you understand how to properly set up and connect the unit, as well as the operation of its many useful a...
Page 8: 1 – Introduction
8 tascam cd-6010 1 – introduction about this manual in this manual, we use the following conventions: the names of buttons and controls are given in the • following typeface: shift. Messages on the unit’s display are shown like this: • on the cd-da format may also be mentioned as • “audio cd” format...
Page 9: 1 – Introduction
Tascam cd-6010 9 1 – introduction about discs in addition to commercially-available music cds, this unit can play cd-r discs that have been recorded in audio cd (cd-da) format, as well as cd-r discs that have mp3 audio and wav audio files recorded on them. Handling of compact discs always insert the...
Page 10: Front Panel
10 tascam cd-6010 2 – names and functions of parts front panel 1 power switch press to turn the power on and off. Caution before turning the power on, minimize the volume of other equipment that is connected to this unit. Failure to do so might cause sudden loud noises, which could harm your hearing...
Page 11
Tascam cd-6010 11 2 – names and functions of parts 9 menu [pitch] button press this button to start menu mode. When in menu mode, press this button to exit menu mode. (see "menu operation basics" on page 19.) to enter pitch adjustment mode, press this button when in shift mode (when the shift indica...
Page 12: Rear Panel
12 tascam cd-6010 2 – names and functions of parts s play mode [repeat] button press this button to cycle through the playback modes in the following order. (see "playback modes" on page 23.) ordinary playback single playback program playback random playback to turn repeat playback on/off, press thi...
Page 13: Display
Tascam cd-6010 13 2 – names and functions of parts 1 track number this shows the track number during playback and track selection. When an audio cd is loaded, a two-digit track number is shown. When a data cd is loaded, a three-digit track number is shown when in menu mode, the menu number is shown ...
Page 14
14 tascam cd-6010 2 – names and functions of parts 1 flash button press to turn the flash start function on and off. 2 display button press this button to change the playback time display mode shown (track elapsed time, track remaining time or remaining time). (see “changing the playback time displa...
Page 15
Tascam cd-6010 15 2 – names and functions of parts y intro check button when stopped, during playback or when paused, press this button to activate intro check mode. When in intro check mode, press the Á play button to play the first 10 seconds of each track in succession. (see “intro check mode” on...
Page 16: 3 – Preparation
16 tascam cd-6010 3 – preparation making connections the illustration below shows an example of connecting other equipment with a cd-6010. Precautions before making connections before connecting other devices to the unit, read their manuals carefully. • turn off the power (or put power into standby ...
Page 17: 3 – Preparation
Tascam cd-6010 17 3 – preparation connecting digital audio equipment connect the digital inputs of stereo amplifiers, mixers, recorders and other digital equipment to this unit’s digital output connectors. Connecting analog audio equipment connect the analog inputs of stereo amplifiers, mixers, reco...
Page 18: 3 – Preparation
18 tascam cd-6010 3 – preparation panel lock function when in shift mode (when the shift indicator is lit), press and hold the display [lock] button to turn the panel lock function on or off. You can also turn it on/off by pressing the display [lock] button while pressing and holding the shift butto...
Page 19: 4 – Menu
Tascam cd-6010 19 4 – menu use the unit’s menu system to make various settings. Among the menu setting items are some that can also be set using dedicated buttons on the remote control. Menu structure the menu structure of the unit includes the following items. Menu number item function set referenc...
Page 20: 5 – Operation
20 tascam cd-6010 5 – operation compatible disc and file types this unit can play the following types of discs and files. Cd-da format discs (audio cds) this unit can play commercially-available music cds and cd-r discs that have been recorded in audio cd format. These types of discs are called “aud...
Page 21: 5 – Operation
Tascam cd-6010 21 5 – operation loading discs inserting a disc to load a cd, press the open/close button on the unit or the eject button on the remote control to open the disc tray. Load the disc with its label side up. Press the open/close button or the eject button again to close the disc tray. Af...
Page 22: 5 – Operation
22 tascam cd-6010 5 – operation selecting a track you can move (skip) to the previous or next track, or you can select a track directly by its track number. Skipping to the next or previous track turn the track skip/data /¯ [index/dir search] knob on the player or press the skip /¯ buttons on the re...
Page 23: 5 – Operation
Tascam cd-6010 23 5 – operation using the search buttons you can search forward and backward in a track while listening to it. 1 play or pause the desired track. 2 press and hold a search Ô/ [auto cue/ auto ready] button on the player or a search Ô/ button on the remote to start searching forward ...
Page 24: Auto-Cue Function
24 tascam cd-6010 6 – various playback functions this chapter explains the various playback functions of the unit. Auto-cue function if the auto-cue function is on and you select a track to play, any silence at the beginning of the track will be skipped, and the player will pause at the instant when...
Page 25: Call Function
Tascam cd-6010 25 6 – various playback functions call function during playback or when paused, press the call [play mode] button on the player or the call button on the remote to locate to the point when playback last started and pause playback. However, when this function is used with a data cd, pl...
Page 26: Repeat Playback
26 tascam cd-6010 6 – various playback functions repeat playback you can repeatedly play back all tracks or repeatedly play back a specified region within a track (a-b repeat playback). Ordinary repeat playback when the repeat playback function is on, behavior depends on the playback mode. All track...
Page 27: Intro Check Mode
Tascam cd-6010 27 6 – various playback functions intro check mode the intro check mode allows 10-second track beginnings to be played in succession. Use the following procedures to enable this mode. Using the front panel buttons: 1 when stopped and in shift mode (shift indicator lit), press the ª st...
Page 28: Setting The Pitch Adjustment
28 tascam cd-6010 6 – various playback functions using the remote control: press the pitch button to turn the pitch control function on. Use the + and − buttons to adjust the setting in the range between −16% and +16%. Setting the pitch adjustment increment to set the adjustment increment for pitch ...
Page 29: Checking The Program
Tascam cd-6010 29 6 – various playback functions 2 use the number buttons or skip /¯ buttons to select the number of the track that you want to add at the currently displayed program number. The selected track number blinks. 3 press the search button to add the selected track. The next program num...
Page 30: Fade In/fade Out Playback
30 tascam cd-6010 6 – various playback functions fade in/fade out playback the player can be set to fade in at the beginning of playback and fade out when playback is stopped or paused. The fade in and fade out times, which determine how many seconds fading in and fading out takes, can be set indepe...
Page 31: Relay Playback
Tascam cd-6010 31 6 – various playback functions flash-loading cue points: ª set cue points are loaded into memory. Note the flash start function is only possible with audio cds. • the flash start function is not possible with data cds. When playing back using the flash start function, the • auto-cu...
Page 32: 7 – Other Functions
32 tascam cd-6010 7 – other functions changing the playback time display mode you can select the playback time that is shown on the display. During playback or when paused, press the display [lock] button on the player or the display button on the remote. Each press of the button cycles through the ...
Page 33: 7 – Other Functions
Tascam cd-6010 33 7 – other functions interval time setting the player can be set to wait for a specified time (interval time) after completing playback of one track before starting playback of the next track. To make the interval time setting, use the 16 intval menu item. 1 select the 16 intval men...
Page 34: 7 – Other Functions
34 tascam cd-6010 7 – other functions controlling the player with a direct playback remote you can connect a tascam rc-20 direct play remote (sold separately) to the remote jack on the front panel to use the unit's direct playback function. Tascam rc-20 direct play remote (sold separately) fader and...
Page 35: 7 – Other Functions
Tascam cd-6010 35 7 – other functions checking the firmware version to check the firmware version, use the 21 info menu item. 1 select the 21 info menu item. 2 press the track skip/data knob on the main unit or the enter button on the remote control to show the system firmware version on the display...
Page 36: 8 – Troubleshooting
36 tascam cd-6010 8 – troubleshooting please check the following items if the unit is not functioning properly. If you are still unable to resolve the problem please contact the retailer where you purchased the unit or tascam customer support. Power does not turn on ª make sure that the power plug i...
Page 37: 9 – Error Messages
Tascam cd-6010 37 9 – error messages when one of the following error messages appears, refer to the response below and resolve the cause. If you are still unable to resolve the problem please contact tascam customer support. Message meaning response err01 toc read error clean or change the disc. Err...
Page 38: 10 – Specifications
38 tascam cd-6010 10 – specifications media and formats device type cd player compatible discs compact discs (12cm/8cm, including cd-r discs) playable disc types cd-a, cd-rom (iso9660 level 1/2/joliet format) playable file formats audio cd (cd-da), mp3 (mpeg audio layer iii), wav mp3 playback specif...
Page 39: 10 – Specifications
Tascam cd-6010 39 10 – specifications backup memory the following settings are backed up even when the power is turned off. Playback mode • playback time display mode • auto-ready function on/off • auto-cue function on/off • cue settings • repeat function on/off • various menu settings • general pow...
Page 40: Cd-6010
Teac corporation tascam.Jp phone: +81-42-356-9143 1-47 ochiai, tama-shi, tokyo 206-8530 japan teac america, inc. Tascam.Com phone: +1-323-726-0303 7733 telegraph road, montebello, california 90640 usa teac canada ltd. Tascam.Com phone: +1905-890-8008 facsimile: +1905-890-9888 5939 wallace street, mi...