- DL manuals
- Tascam
- Stereo Equalizer
- DM-3200
- Release Notes
Tascam DM-3200 Release Notes
Summary of DM-3200
Page 1
Dm-3200 digital mixer » release notes v1.50 d00992200a.
Page 2: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 contents manual addendum ................................ 3 new features ......................................... 3 new features in v 1.50 .......................... 3 user defined layer ..................................... 3 registering a u...
Page 3: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 manual addendum the transport keys can be locked to protect from pressing them accidentally by pressing shift + stop . It is now possible to create a user-defined layer that freely combines the dm-3200’s modules. You can control some module pa...
Page 4: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 mute key function you can select whether the mute keys will be used as controllers for the mixer parameter mute or as midi event trigger keys. If they are used as midi event triggers, midi control change messages will be transmitted. If you wa...
Page 5: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 a gain reduction meter has been added for the estab- lished tascam fx effects. This meter is displayed in the effects screen when the guitar compresser and compresser is loaded. Figure 6 example screen for logic control tascam fx compressor gr...
Page 6: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 when the separately sold if-fw/dm mkii option card is installed, you can now transfer up to 32 channels of i/o (at 44.1khz/48khz/88.2khz/96khz) between your computer and the dm-3200. For details on the if-fw mkii, refer to the if-fw mkii opera...
Page 7: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 midi control change message support for mixer parameters midi control change messages are now supported, allow- ing mixer parameters ( fader , pan , and mute ) to be controlled. This allows midi devices to be controlled in synchroniza- tion wi...
Page 8: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 module parameter copy function you can now copy module parameters from a module to another module. Param copy settings access the utility>param.Copy screen. The copy opera- tion is performed in the module to module section of this screen. Figu...
Page 9: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 meter over-level settings in the meter/fader>meter screen, you can now make fine adjustments to the point at which the over-level indica- tor will light in order to match other equipment present in your system. Figure 12 meter/fader>meter scre...
Page 10: Dm-3200 Release Notes
Dm-3200 release notes 10 tascam dm-3200 release notes v1.50 new features in v 1.20 firewire card support by installing an if-fw/dm firewire interface card (sold separately), it is now possible to transfer audio data between your computer and a dm-3200. An if-fw/dw card can only be installed into slo...
Page 11: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 11 by installing an if-fw/dm firewire interface card (sold separately) into slot 1 of the dm-3200 ver1.20, you can transfer audio data between your computer and the dm-3200. An if-fw/dm inserted into slot 2 will not function. Figure 1 is an ex...
Page 12: Dm-3200 Release Notes
Dm-3200 release notes 1 tascam dm-3200 release notes v1.50 midi control external midi devices can now be operated from a dm-3200, using midi control change messages and midi program change messages using the midi controller , midi fader , and midi mixer screens. Remote operation through mmc dm-3200 ...
Page 13: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 1 connect the midi in and midi out ports of a dm-3200 and the midi device bi-directionally. You may also use these controllers as “send only” as well by just connecting the midi out port of the dm-3200 to the midi device. Connection setting of...
Page 14: Dm-3200 Release Notes
Dm-3200 release notes 1 tascam dm-3200 release notes v1.50 midi controllers you can send midi control change messages using the pod knobs of dm-3200. Figure 8: midi controllers screen the midi controllers screen comes with standard controllers. Use the cursor key to move the bordered frame indicatin...
Page 15: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 1 you can send midi control change messages to exter- nal midi devices using the pod knobs, fader and the mute key of the dm-3200. In the default setting, they control pan , fader , and mute respectively. Figure 10: midi mixer screen this oper...
Page 16: Dm-3200 Release Notes
Dm-3200 release notes 1 tascam dm-3200 release notes v1.50 assigning parameters to rotary encoders you can assign parameters to the rotary encoders using the four encoder mode keys (please refer to the “encoders” section on page 20 in the owner’s manual). In the previous versions of dm-3200, paramet...
Page 17: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 1 this section explains how to make a cascade connection between two dm-3200s that are running version 1.20. 1 using the tascam cascade cable (pw-1000cs – sold separately), connect the cascade ports of the two dm-3200. Warning only use the spe...
Page 18: Dm-3200 Release Notes
Dm-3200 release notes 1 tascam dm-3200 release notes v1.50 gpi functionality dm-3200 ver1.20 supports gpi functionality. This allows you to send 8 output signals from the gpi port (d sub 9-pin connector) on the rear panel, and control external devices from the dm-3200. The dm-3200 allows you to give...
Page 19: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 1 gpi is set using the gpi sub-screen, which is a new addition to the utility screen. Figure 14: utility>gpi screen the gpi config section on the left of the screen allows you to set the item and the type of the gpi output trigger for each of ...
Page 20: Dm-3200 Release Notes
Dm-3200 release notes 0 tascam dm-3200 release notes v1.50 time event section you can set up to 16 time events in the gpi event list . How to control the gpi event list to move the cursor vertically within the list, use either the up and down cursor key or the pod 4 knob. To move the cursor horizont...
Page 21: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 1 the following mixer settings cannot be changed while automation data is being re-played. Surround mode grouping setting channel link setting pan switch setting [set by shift + output assign ] if you try to change the above settings, a pop-up...
Page 22: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 1.10 of the dm-3200 operating system provides daw remote control functionality using the remote fader layer. Support has been added for digidesign pro tools, cakewalk sonar, motu digital performer, steinberg’s nuendo & cubase and apple logic p...
Page 23: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 the project property shows date information, but in previous versions this was the date of creation. This has been fixed so that the most recently edited date and time are shown. When you press the store button in the vari- ous library screens...
Page 24: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 switching of buss pan follows st pan during automation is now disabled switching the buss pan follows st pan on/off while automation is operating has now been disabled. If you attempt to switch this while automation is operating, a popup messa...
Page 25: Dm-3200 Release Notes
Dm-3200 release notes tascam dm-3200 release notes v1.50 when making rec function settings with multiple dtrs devices connected, and the rec function of track 9 or later is operated from the dtrs unit, that status is not reflected in the mixer. Dtrs rec function setting when controlling via p2 auto ...
Page 26: Dm-3200
Teac corporation phone: +81-422-52-5082 www.Tascam.Com 3-7-3, nakacho, musashino-shi, tokyo 180-8550, japan teac america, inc. Phone: +1-323-726-0303 www.Tascam.Com 7733 telegraph road, montebello, california 90640 teac canada ltd. Phone: +1905-890-8008 facsimile: +1905-890-9888 www.Tascam.Com 5939 ...