1. DL manuals
  2. Tascam
  3. Accessories
  4. FW­1082
  5. Setup Manual

Tascam FW­1082 Setup Manual

Manual is about: DAW Control Surface / FireWire Audio-MIDI Interface

Summary of FW­1082

  • Page 1

    Tascam fw­1082 cakewalk sonar setup ..............................................................................................................................2 control details ............................................................................................................3 additional...

  • Page 2: Setup

    Setup for sonar compatibility, the fw­1082 comes with a control surface plug­in that is compatible with sonar 3.1b & higher on windows xp/sp1 & higher. Install the plug­in from the cd­rom. Open the fw­1082 control panel and select native mode from the control protocol drop down menu under the settin...

  • Page 3

    Control details generally the fw­1082’s surface controls will function as expected, controlling their like parameters in sonar. For example: faders, mutes, solos and transport control will control those parameters in sonar. Exceptions and specific details follow: additional transport keys set + rew ...

  • Page 4

    Pan & eq when the eq/pan led is illuminated: · the lowest of the four encoders shown at right will control the pan parameter of the selected channel in sonar. · the encoders labeled as gain, frequency and q will control those parameters of the eq band selected by the illuminated buttons on the selec...

  • Page 5

    F­key shortcuts the functions of the f­keys are programmable in sonar by selecting tascam fw­1082 under the tools menu. The screen below will appear where you can configure the f­ keys and save/load configurations. Factory default settings are shown here: f1 = save f2 = undo f3 = copy f4 = paste shi...

  • Page 6

    Bank keys press the bank > key or the bank key, to shift the fw­1082's controls to the next 8 or previous 8 channels, respectively. Hold shift and press the bank > key or the bank key, to shift the fw­1082's controls to the next or previous channel, respectively. Hold set and press the bank > key to...