Tascam HS-8 Software Manual - Hs-8

Manual is about: 8 Channel Audio Recorder

Summary of HS-8

  • Page 1

    Tascam hs-8 1 hs-8 d01162820a new functions in firmware v1.20 a tape emulation mode has been added for use with an editor/ synchronizer that supports the sony p2 protocol using the rs-422 connector. Tape emulation mode the tape emulation mode emulates linear time-based operation like that of tape. U...

  • Page 2: Hs-8

    Hs-8 2 tascam hs-8 sync and time code settings (sync t/c ª screen) clock page if the master clock is set to video and the tape emulation mode is on, the video and time code frame rates must be matched. For example, if ntsc 29.97hz video is the master clock, the project time code frame type must be s...

  • Page 3: Hs-8

    Tascam hs-8 3 hs-8 firmware v1.20 fixes the following pop-up messages have been changed. Old message new message details remarks cfn not recommended format for recording/playing. When media loaded: cfn formatting not optimal for recording/search. When recording starts: cfn formatting not optimal for...

  • Page 4: Hs-8

    Hs-8 4 tascam hs-8 owner's manual addendum importing files recorded by other devices bwf format files recorded by other devices can be imported to this unit and played back. In addition, files created by other tascam hs series units can be played back without rebuilding them first if they meet the f...