73242 rev b tascam teac professional division mmr-8 modular multitrack recorder mmp-16 modular multitrack player mmr-8/mmp-16 version 4.0 owner’s manual update.
Tascam mmr-8/mmp-16 version 4.0 table of contents mmr-8 / mmp-16 v ersion 4.0 u pdate .................................................................................................. 2 i nstalling t he mmr/mmp s oftware u pdate .........................................................................
Tascam mmr-8/mmp-16 version 4.0 owner’s manual update 2 mmr-8 / mmp-16 version 4.0 update this document details changes and new features in software version 4.0 for the tascam mmr-8 and mmp-16 modular multitrack units and the mm-rc remote. This document only explains features and enhancements that h...
Tascam mmr-8/mmp-16 version 4.0 owner’s manual update 3 changes in version 4.0 the following functional changes and bug fixes have been made to the mmr-8/mmp-16 software in version 4.0. These changes are explained in detail in this document: ! Pro tools gain and mute automation support for pro tools...
Tascam mmr-8/mmp-16 version 4.0 owner’s manual update 4 disabling pro tools volume automation volume (gain) automation can only be disabled using a pro tools system – it cannot be disabled directly on the mm series unit. To disable protools volume automation: • go to the edit window in pro tools • p...
Tascam mmr-8/mmp-16 version 4.0 owner’s manual update 5 viewnet audio support version 4.0 adds support for the viewnet audio graphical interface network. Before the viewnet audio application can work with a tascam mm series machine, the proper network settings must be configured on the mm unit. Once...
Tascam mmr-8/mmp-16 version 4.0 owner’s manual update 6 ip gateway use this field to enter the ip gateway if the viewnet network is part of a larger network which uses a gateway. If there is no gateway in use, there is no need to enter any data in this menu. 01234567890123456789 lcd characters indic...
Tascam mmr-8/mmp-16 version 4.0 owner’s manual update 7 machine name a new setup menu in version 4.0 permits each mm series unit to have a machine name. This name is used by the viewnet software as a convenient way to refer to a particular machine, and is shown in the network and project view screen...
Tascam mmr-8/mmp-16 version 4.0 owner’s manual update 8 undo / redo change 100 levels of undo and redo are now supported on all mm series units. Previous to version 4.0, there were only 10 levels of undo and redo. Clip names clip names for new audio recordings are now set when in non-destructive rec...
Tascam mmr-8/mmp-16 version 4.0 owner’s manual update 9 tascam teac professional division mmr-8/mmp-16 version 4.0 update teac corporation 3-7-3, nakacho, musashino-shi, tokyo 180, japan phone: (0422) 52-5082 teac america, inc. 7733 telegraph road, montebello, california 90640 phone: (213) 726-0303 ...
