Tascam PA-150 Specifications

Balanced and Unbalanced Connections

You wonÕt have to worry about using the PA-150 today Ñ or

tomorrow. With both balanced and unbalanced connectors, it

will easily integrate into any studio. The back panel inputs are

optimized for +4 dBm and -10 dBV levels, minimizing gain

staging to a single front panel sensitivity control. Also on the rear

panel, is a stereo/BTL mode selector switch that enables you to

take advantage of the PA-150Õs Dual Power Design. That means

it can be used to pump out stereo or mono signals. Of course,

solid speaker wire terminals are well labeled and make it easy

to set up for bridged mono or stereo use. Setup is quick and

simple.

You Need Power, Performance and Protection

The PA-150 sounds great and delivers 150W per channel at

4 ohms or 115W per channel at 8 ohms. And with an extremely

flat frequency response of 20Hz-20kHz at less than .08% THD, it

delivers a clean, transparent signal perfect for recording studio

monitoring applications. And while the PA-150 packs enormous

headroom, youÕll be pleased to know that it will warn you if your

signals get too hot with its bright LED clip indicators for each

channel. 

¥ Stereo/BTL mode select switch

¥ Balanced and unbalanced inputs

¥ 150W per channel at 4 ohms

¥ 115W per channel at 8 ohms

¥ Accepts balanced XLR or 1/4" jacks

¥ Connect your speaker wires for stereo or bridged mono use

¥ Power indicator turns red whenever the PA-150 is protecting

PA-150

DUAL POWER AMPLIFIER

page 1 of 2

Every personal, project or major recording studio needs

power. And when it comes to monitoring signals from

mixers, MIDI equipment and other gear, you need to

power those nearfield or studio monitor speakers. Clean

sound, space consciousness, high-performance and

flexibility are your criteria. And thatÕs exactly what makes

the TASCAM PA-150 an ideal fit for personal and project

studios or for major studios looking for a high-value

power amp for a B suite or off-line editing room. With its

dual power, switchable stereo/mono design, it excels in

control room and recording studio applications Ñ

whether powering single speakers, stereo pairs or

bridged series. 

As with all TASCAM studio equipment, the PA-150 is

built to last and will provide years of trouble free opera-

tions. With semiconductor circuitry, a convection-cooled

heat sink and a rugged power transformer, the PA-150

delivers up to 150W per channel of pristine sound in a

compact 2U, rack mountable design.

Front Panel-PA-150

P R E L I M I N A R Y