Tascam RC-601mkII Owner's Manual - Selecting The Playback Point

TASCAM  RC-601MKII

11

SELECTING THE PLAYBACK POINT

Selecting a Track

Track skip

Tracks can be selected (skipped) by using the 

TRACK

(

/

¯

) key. 

 key:

Pressing this key when the elapsed time of a track is one 

second or more returns the remote control unit to the start of 

that track. When the elapsed time is less than one second, 

the remote control unit skips to the start of the previous 

track.

¯

 key: 

The remote control unit skips to the start of the next track. 

Pressing this key again makes the remote control unit skip 

to the start of the following track.  

•  In the program playback mode, the remote control unit 

skips to the previous and next tracks according to the 

program order.

• When 

the 

 key is pressed at the start of track 1, the 

remote control unit skips to the start of the final track, 

and when the 

¯

 key is pressed at the final track, the 

remote control unit skips to the start of the first track. 

• When the 

 or 

¯

 key is pressed while disc 

operations are stopped, the remote control unit skips to 

the start of the first track on the disc.

RC-601MKII operation after track selection

Operation of the remote control unit after a track is selected 

by the 

TRACK

 key differs according to the operating state 

of the remote control unit when this key is pressed, the 

ON/OFF state of the auto cue function, and the auto cue up 

setting. (

→

 page 17 “Auto Cue Function”)

When the auto cue function is ON:

When the auto cue function is ON, the remote control unit 

basically stands by according to the auto cue up setting.

When the auto cue function is OFF:

The remote control unit enters the same state as that before 

the 

TRACK

 key is pressed. Note, however, that the remote 

control unit enters the monitor playback mode when a track 

has been selected while disc operations were stopped or 

while the tray was open.

Specifying the track No.

While disc operations are stopped, in the monitor playback 

mode or in the monitor PAUSE mode, you can use the 

numeric keys to specify track numbers. 

Specify tracks using two digits. For example, to specify track 

3, press “0” and then “3”. 

When the 

INDEX SEARCH

 indicator is lit, you cannot 

specify tracks using the numeric keys as the numeric keys 

are used for specifying the index No.

[NOTE]

•  If a non-existent track No. on the disc is input, the final 

track is automatically selected.

RC-601MKII_Eng.indd   11

3/24/2005   2:38:16 PM