Tascam RC-848 Owner's Manual - page 21
CHAPTER 4 OPERATIONS
Hook up
multiple
DA sync
basic example of which shown in Chapter
WARNING
Make all connections with
OFF.
the
assign them machine ID numbers
while
they
turned
After you
connected all components of
switch on
to the
system. Be
to
all the
BEFORE the
If you
using the
assign them machine ID numbers at this stage.
IMPORTANT
Assign different number to each of the
Insert new Hi8
into each of the machines.
NOTES
The DA is
to operate only with
video tapes. You cannot
any
other tapes in the DA.
The DA automatically ejects tapes thinner than 8.5
or longer
tapes.
Don’t
tape which
once used for video recording.
Select
DA with the MACHINE switch and the numeric keypad, then
the remote
to rewind the
in the selected
the
to the
beginning.
Press the remote CHASE and the “CHASE” will show in the LOCATE TIME
window.
Enter the selected machine’s ID number on the numeric keypad.
Access the
menu screen (Group
which will look like this
If
want to exit
format mode at this stage, press ESCAPE or
Press
display
You
change the sampling
in the next step,