1. DL manuals
  2. Task Force
  3. Blower
  4. 24083
  5. Operator's Manual

Task Force 24083 Operator's Manual

Manual is about: Electric Blower/Vac with Bag

Summary of 24083

  • Page 1

    Electric blower/vac with bag - 1 - item #241481 read your operator’s manual completely and carefully before attempting to set up or operate your new tool. All operators of this equipment should read and understand all safety rules printed on the machine and in this operator’s manual before use. Caut...

  • Page 2

    Product specifications - 2 - specification...................................................................................................................................2 contents of carton..............................................................................................................

  • Page 3: Safety Tool Symbols

    Safety information please read and understand the entire manual before attempting to assemble, operate or install the product. These safety instructions are not meant to cover every possible condition that could occur. If you have any questions regarding the product please call customer service at 1...

  • Page 4

    - 4 - safety information important safety instructions read all instructions before using for houshould use only. Install only on a nominal 120 v supply protected by a maximum 20 a overcurrent protective device. Do not use near bystanders. Do not use with damaged cord or plug. If appliance is not wo...

  • Page 5

    While operating wear safety glasses or goggles that are marked as meeting ansi z87.1-1989 standards. Also wear ear/hearing protection when operating this unit. Wear a face or dust mask when operating in dusty environments. Long-sleeved shirts are recommended. Wear heavy, long pants, boots and gloves...

  • Page 6

    While operating unit as a blower never point the blower in the direction of people or pets or in the direction of windows. Use extra caution when blowing debris near solid objects such as trees, automobiles and walls. While operating unit as a vac avoid situations that could catch the bag on fire. D...

  • Page 7

    Fig.1 co bag rd blower tube auxiliary handle lock button switch -7 - vac tubes this unit includes the following: electric blower blower tube vac tubes shoulder strap bag operator’s manual examine all parts to make certain that nothing is missing and no breakage has occurred during shipping. Damaged ...

  • Page 9

    Connecting the power cord use a minimum 25’ (7.6 m.) long, 16awg, outdoor electrical cord when using this unit. Other sizes include: minimum wire size for extension cords for 120 volt appliances using 0-12 amps* cord length (ft.) 25 50 100 150 wire size (awg)* 16 14 12 10 to reduce the risk of elect...

  • Page 10

    The bag is installed and zipped closed (when used as a vac). Operating tips be sure the bag is zipped closed before operating the unit. Assure the unit is not directed at anybody or any loose debris before starting the unit. Verify that the unit is in good working condition. Make sure the tubes and ...

  • Page 11

    Clearing a blocked tube / impeller 1. Slide the power/speed switch down in the off position until the unit comes to a complete stop. 2. Unplug the unit. 3. Remove the blower tube or vac tubes and the bag. 4. Carefully remove material blocking the tube or impeller. Inspect the blades to assure no dam...

  • Page 12

    Servicing double-insulated units this unit is double insulated. In a double-insulated unit, two systems of insulation are provided instead of grounding. There is no grounding provided and no means of grounding should be added to this unit. Extreme care and knowledge of the system is required when se...

  • Page 13

    Trouble shooting unit will not blow or vacuum problem corrective action bag full empty bag. Blocked tube clear the blockage as described on page 10. Blocked impeller clear the blockage as described on page 10. Damaged impeller take the unit to an authorized service dealer. Dirty bag clean the bag. T...

  • Page 14

    Limited two-year warranty the manufacturer warrants to the original purchaser that each new product and service part is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective product or part as follows from the original date of purchase. 2-yea...

  • Page 15

    Parts list - 15 -.

  • Page 16

    20 2 shrink tube for wire 21 1 22 1 switch button 23 1 spring of switch button 24 1 shaft sleeve 25 1 fan 26 1 small cap 27 1 intake cover 28 1 shaft of bag 29 1 rear vac tube 30 1 front vac tube 31 1 bag item no. Part no. Qty description 1 1 front blower tube 2 1 rear blower tube 3 1 spring 4 1 loc...