Caution before operating this unit, please read this manual thoroughly and retain it for future reference. If you must store your pressure washer in a place where temperature is below 41ºf (5ºc), you must apply winterizing procedure to protect it. Failure to winterize the unit may permanently damage...
Table of contents technical specifications ....................................................................................................................... I precautions...............................................................................................................................
Important safety instructions - read first! Safety warnings when using this product, basic precautions should always be followed: • read all the instructions before using the product. • water spray must never be directed towards any electric wiring, devices or directly towards the pressure washer ma...
2 safety features and electrical power information the pressure washer is equipped with a stop de- vice that will sense when the trigger on the gun is released. It will open the power circuit to the motor and cause the pressure washer motor to stop. Motor will resume again when trigger is pulled. Gr...
Package contents 3 a b c q d e f h i j o l 2 k 1 k n needle p parts list item no. Quantity part name a 1 turbo wand b 1 adjustable wand c 1 gun assembly d 1 left wing (gun holder) e 1 gun holster f 1 extension hose h 1 hose reel i 1 high-pressure hose j 1 right-wing (wand holder) k1 1 quick-connect ...
4 assembly instructions water supply (cold water only): • do not draw non-water liquids through the unit. For use with cold water supply only. • water hose must be at least a 1/2 inch diameter. • flow rate of water supply must not fall below 2 gpm (gallons per minute). • flow rate can be determined ...
Operating instructions 5 step 1 make sure that the on/off switch is in the “off” position. Off fig. 2 step 2 fasten the quick-connect coupling (k1) onto the garden hose and then attach the quick-connecting cou- pling (k1) to the inlet adaptor (k2). K2 k1 fig. 3.
6 operating instructions step 3 insert the wand (a or b) into spray gun, and twist 1/4 turn until rectangular tab appears. A or b fig. 4 f c i l-shape connector fig. 5 step 4 attach the l-shape coupler end of the extension hose (f) into the water outlet and the other end into the hose reel (h). Fast...
7 operating instructions step 6 plug the unit into an outlet. Press “test”. Then press “reset” to assure proper connection to power. Test reset fig. 7 fig. 8 step 7 before turning the unit “on”, depress the trigger to bleed any trapped air out of the pump and hose. On step 8 release trigger and star...
8 using the accessories fig. 10 adjusting the spray the adjustable spray nozzle can be adjusted from fan to jet. The spray is adjusted from jet to fan spray by turning the nozzle as shown in fig. 10. Caution jet spray adjustment is very aggressive. Do not adjust while spraying. We recommend that for...
9 working with detergents working with detergent ensures a quick soaking of the dirt, and allows the high-pressure water to pen- etrate and remove the dirt more effectively. Always spray detergent on a dry surface, do not pre-soak area. Wetting the surface first dilutes the detergent and reduces its...
Working with detergents — continued step 4 turn on the pressure washer. Pull trigger to operate unit. The liquid detergent will automatically mix with water and be discharged through nozzle. Apply de- tergent to a dry work surface, from bottom to top. Step 5 allow detergent to remain on the surface ...
11 shutting down and cleaning up step 1 turn the switch to “off” (0) position and unplug cord from outlet. Step 2 turn off the water supply. Step 3 press trigger to release water pressure for 20~30 seconds. Step 4 disconnect the garden hose from the water inlet on the unit. Step 5 disconnect the hig...
Winterizing and long-term storage 12 optimum winterizing procedure material required: pump saver winterizing your pressure washer will help protect and prolong its life. It is strongly recommend you follow the below steps using a pump saver. This will keep the internal parts lubricated, protected fr...
13 user maintenance connections connections on pressure washer hoses, gun and spray wand should be cleaned regularly and lubricated with non-water soluable grease. B n fig. 15 l k2 water filter screen (fig. 16) the pressure washer is equipped with a water inlet filter (l) that prevents debris going ...
15 troubleshooting - continued problem cause solution garden hose loose fittings. Tighten fittings. Connection leaks. Missing/worn rubber washer. Insert new washer. Spray wand, or spray nozzle not properly attached. Insert the spray nozzle into the trigger extension, or gun. Carefully press in again...
Warranty 16 limited 1-year warranty this pressure washer is warranted to be free of defects in materials and workmanship under normal resi- dential use for one (1) year. Specific warranty applies to: • electric motor and pump are warranted for one (1) year. • standard accessories and attachments inc...
17 replacement parts and diagram a b c d e f g h q j k1 k2 l m n manual p parts list item no. Quantity part name part no. A 1 turbo wand (ze04-090-0004) b 1 adjustable wand (ze01-090-0003) c 1 gun assembly (ze01-090-0001) d 1 left wing (gun holder) (ze04-090-0007) e 1 gun holder (ze04-000-0001) f 1 ...
Printed in china.
