TATA Motors nano genX Owner's Manual - page 74
72
GEAR SHIFTING (MT)
DRIVING
Gear Shifting (MT) :
The gearshift pattern is shown on
the gear shift lever knob. All forward
gears being synchronized, provide
easy and effortless gear shifting.
Always remember to press the
clutch pedal fully while shifting the
gears and also to release the clutch
pedal gently.
Avoid sudden clutching i.e. abrupt
release of depressed clutch pedal.
NOTE
The reverse gear should be
engaged only when the car is
stationary. Wait for 5 seconds
after de clutching to ensure
smooth engagement of the
reverse gear.
WARNING
•
Reduce your speed and
change down to a lower gear
before going down a long or
steep hill. Avoid riding the
brakes or they may overheat,
resulting in brake failure.
•
When driving on slippery roads,
be sure to slow down before
changing down. Excessive and
or sudden changes in engine
speed may cause loss of
traction, which could cause you
to lose control.
•
Make sure that the vehicle is
completely stationary before you
change into reverse.
CAUTION
•
To help avoid clutch damage,
do not use the clutch pedal as
a footrest while driving or use
the clutch to keep the vehicle
stationary on a hill. Depress the
clutch fully when changing gear.
•
When changing gears or
starting off, do not race the
engine. Racing the engine can
shorten engine life and prevent
smooth operation.