1 user manual product label:.
2 model: a28188e 1.Overview ： a28188e is a wlan 11n usb module, which fully supports the features and functional compliance of ieee 802.11n,e and i standards. It supports up to 150mbps high-speed wireless network connections. It is designed to provide excellent performance with low power consumption...
3 ■low latency immediate high-throughput block acknowledgement (ht-ba) ■ phy-level spoofing to enhance legacy compatibility ■ power saving mechanism ■ channel management and co-existence ■transmit opportunity (txop) short inter-frame space (sifs) bursting for higher multimedia bandwidth wlan phy fea...
4 general specification model a28188e product name wlan 11n usb 1t1r module major chipset rtl8188etv standard 802.11b/g/n -ht20/n-ht40,802.3,802.3u datatransfer rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90, 120 and maximum of 150mbps modulation method cck/bpsk/ qpsk/ 16-qam/ 64-qam frequency rang...
5 led no os support windows 2000,xp32-64,vista 32/64,win7 32/64,linux,mac, android，win ce security wep, tkip, aes, wpa, wpa2 interface usb 2.0 power consumption dc 5v maximum power dissipation in 60ma operating temperature -10~+60° c ambient temperature storage temperature -20~70°c ambient temperatu...
6 parameters conditions typ unit 11mbps 145 ma 54mbps 145 ma 65mbps 145 ma receiving tests the biggest receive 135mbps 145 ma 11mbps 310 ma 54mbps 225 ma 65mbps 225 ma transmission biggest transmission test 135mbps 200 ma the depth waits for an opportunity 5 ma deep sleep 5 ma browse the webcurrent ...
7 pin description matters needing attention before patch installed the wifi module 1.The customer must be at the time of open stencil will solder hole up wifi module, please press 1 to 1 0.7 mm is widened to open outward again, according to the thickness of 0.12 mm. 2.The wifi module before launch p...
8 5.A furnace temperature according to the size of the customer the mainboard, generally like to stick on the tablet 250 +/-5 degrees. Pcb size model: a28188e.
Fcc statment this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: the m...
This modular complies with fcc rf radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. If the fcc identification number is not visible when the module is installed inside anothe...
