Tatung TRC-6STW User Manual - page 5
4
7
Take apart
Hold the water collector and pull.
Fit in
Click in the water collector into the groove.
Water collector
Steam valve
Take apart
1. Pull upward while turning the left and right.
2.If there is any difficulty to pull out, push the
valve from inside of the lid.
Take apart
Fit in
1.
3. Make sure the plug fits into the outlet well, otherwise it may cause fire
due to overheat.
4. Do not put cooker in damp or unsteady place. Keep away from fire or any
heating source.
5. Keep face and hand away from hot steam outlet on top lid.
6.
7.
8.
Do not put in damp or unsteady place.
2. Turn off the warmer switch when the rice cooker is not in use.
Do not immerse the cooker into water or rinse it. It may cause electric shock,
a short circuit, or the damage on the rice cooker.
Do not put rice cooker or inner pot on the burner top. Keep away from the fire
or any heating source.
Be careful of the hot steam coming from the valve on the upper lid.
Safeguard
Clean
1.Inner pot – take out the inner pot from the cooking pot. Soak in clean water
for half hour and use provided spatula to scoop the rice stain on the bottom.
Then wash with water or soapy water and dry with paper tower or cloth. Or
put it into dishwasher for wash and dry.
2.Cooking pot – rice and other foreign matters may be stuck to the heating
plate and users shall wipe it off with soft and dry cloth. The stainless steel
inner pot can be more adequately contact with the heating plate after
foreign matter removal. Therefore, the rice can be cooked well and tasted
well.
3.Collector – pull out the water collector from back of the cooking pot and
drain off the water in the water collector. Wash it with clean water or dish
soap. After washing and cleaning, place it back to the same spot. The water
will drift without it.