Designed by musicians for musicians stomp-head stomp-head 3 guitar amplifier owner’s manual master tube design.
An ultra light, very compact floor amplifier with integrated foot- switch, designed to be set on the pedal board, along with effects or, placed directly on the stage floor. It greatly benefits the player with immediate access to all amps potentiometers and options. When the amp is set on the pedal b...
60watt 25watt stomp-head stomp-head 3 3 sh sh guitar amp taurus amplification nn a e h l c mute boost master tube design e x t . C t r l . Gain bass treble presence volume middle range 5 4 3 2 1 6 7 8 5 4 3 2 1 6 7 8 1 1 2 3 4 2 3 4 1 1 2 3 4 2 3 4 1 1 2 3 4 2 3 4 1 1 2 3 4 2 3 4 hi-gain bass treble...
- 3 - the boost mode allows for instant increase of volume level during a performance. The potentiometer [17] and a foot-switch [24] are designed to control the boost mode. The boost function performs two features at the same time: it boosts a signal at the input of the preamp, giving extra compress...
- 4 - 1. The graph below shows how the external foot-switch should be connected in order to control amplifier functionalities. If the external foot switch is connected, therefor, the internal amp foot-switches become disconnected. Note: external controller should be implemented with bistable switche...
- 5 - effect and mixer connection the external effects may be connected between both preamps (clean and lead) and the master section through the parallel effect loop. This type of connection is recommended when the volume pedal or delay, reverb, flanger type of effects are used. When the mixer or th...
- 6 - external devices connection external devices such as a preamp or a guitar dsp can be connected to the stomp head. Both devices may be set-up by two different method. 1. To the amp input – in this configuration all potentiometers and foot-switches will be active. 2. Directly to the power amp, b...
Amplifier produces high volume levels. Staying in places of high volume levels could cause permanent hearing loss. Do not use the amplifier in humid and dusty places. Do not operate the amplifier through the unearthed socket. Do not leave the amplifier in the vicinity of children. Do not use the amp...
