1 user’s manual taurus racing bike z9 pro tf-z9-pro.
2 safety instructions • to ensure the best safety of the exerciser, regularly check it on damages and worn parts. • if you pass on this exerciser to another person or if you allow another person to use it, make sure that that person is familiar with the content and instructions in these instructions...
1 • assemble the exerciser as per assembly instructions and be sure to only use the strucutral parts provided with the exerciser and designed for it. Prior to the assembly, make sure the contents of the delivery is complete by referring to the parts list of the assembly and operating instructions. •...
2 exploded drawing.
3 part list part no. Description specification q't y part no. Description specification q'ty 1 main frame 1 53 nylon nut m8*1.25*8t 5 2 front stabilizer 1 54 buffer d9*d5.8*13 6 3 rear stabilizer 1 56 magnet cell 29*3*3 6 4l left triangle cap 95.7*57.2*51.3 2 57 cross bolt m5*0.8*10l 3 4r right tria...
4 24l left crank 170*9/16"-20bc 1 80 brake plate 54.5*37*13 1 24r right crank 170*9/16"-20bc 1 81 cow leather 52*31*4t 1 25l&25 r pedal jd-012,9/16" 1 82 bolt m8x1.25x45l 1 26 bolt m8x1.0x16 2 83 cable plug d4*d12*13 2 27 bolt cover d23x6.5 2 84 cross bolt m5*0.8*10l 4 28 screw m10*1.5*20l 5 85 comp...
5 51 spring d1.2*55l 1 inner-hex spanner m6 1 52 flat washer d18*d8.5*1.0t 1 open-wrench 155*30*5t 1 inner hex wrench m6,8.8 1 check list (contents of package).
6 step 1 1) assemble the front stabilizer (2) and rear stabilizer (3) onto the main frame (1) by using the flat washer (7), spring washer (6), and allen bolt (5). 2) adjust the proper height by turning the wheel of front & rear foot cap (59). 3) cover the cover of moving wheel (79).
7 step 2 1) front post (8) & seat post (9) already pre-assembled with main frame, adjust the most suitable position by knob.
8 step 3 1) fix handlebar (13) onto the front post (8) by l knob (12) and then fix the stop bolt (15) and spacer (106) 2) assemble the saddle (10) onto the seat post (9) by l know (12), and then fix the stop bolt (5) and spacer (106)..
9 step 4 1) through the computer cable(105) from the hole of computer fixing plate (fig a) 2) insert the cable plug (83) (fig b) 3) fix the computer (85) onto the plate(14) by screw (84).
1 0 step 5 1) assemble the left pedal(25l) onto left crank by anti-clockwise, and fix the right pedal(25r) onto right crank by clockwise 2) connect the adaptor(100) with machine and electric socket.
1 1 step 6 you can move the machine easily.
1 2.
1 3.
1 4.
1 5.
1 6 programme:.
