Designed by musicians for musicians slim line ts-10 ts-12 ts-1010 ts-10, ts12, ts-1010 operating manual.
− 1 − the taurus' proprietary mlo system provides exceptional sound creation flexibility, ease of use and intuitive tailored sound using two tone knobs only. The mlo automatically integrates optimal tuning of mid frequencies using only bass and treble potentiometers. Logical and effective tone adjus...
1 − 2 − power output: 3 ts ts ts 010 : : : , 2 1 2 0 signal level equalization info: additional features 50w rms / 4ohm 00w rms / 8ohm for additional speaker cabinet 40 410 95 14 0 59 10”/8ohm + 12”/8ohm + 1 ” /8ohm + button − increases sonic expression preamp indicator with pre/post selector and gr...
− 3 − 2 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Active input [jack 6.3mm]. Passive input [jack 6.3mm]. Peak indicator in preamp section. Punch button increases sonic expression. Gain control bass control with mlo system. 3−way switch to reduce or boost low frequency [dbs cut/o...
Opis equalizera parametrycznego − 4 − 3 4 1. 2. 3. 4. 5. 6. 7. True voice” power on/off switch. 230v/50hz ec power input socket with ac fuse. [optional − 100v/120v/60hz]. Balanced line output [xlr] with „ speaker cabinet simulation. Line output pre/post eq switch. Line output ground lift switch. Spe...
Set every front panel potentiometer and switch in following positions: bass,gain, treble, level and volume in 12 o’clock position, keep presence, parametric equalizer and dbs in “off” position. Set the horn switch on the combo's back panel according to your needs. Connect your bass guitar to amplifi...
− 6 − parametric equalizer 7 the parametric equalizer is based on 2 potentiometers − level and frequency. The eq is set to work in range between 120hz and 4khz . The level potentiometer is responsible for amplifying or cutting out selected frequences chosen by frequency pot. When level pot. Is set i...
Caution! It is necessary to comply with basic rules while using devices supplied from ac power. The device should be supplied with current of parameters complied with markings on the product. It is recommended to use plugs with grounding. The amplifier should be place in a spot that anables free air...
