Tavish Design Minotaur Quick-start Manual And Owner's Manual - page 7
6
Specifications
Parameter
Specification
Rated Power Output
140 W per channel continuous, both channels driven into 8Ω
Power Output vs. Load Impedance
190 W per channel into 5Ω
220 W per channel into 4Ω
240 W per channel into 3Ω
Output Noise
<110 µV RMS C-weighted 30 Hz – 8 kHz
>108 dB below rated power
Input Sensitivity and Gain
+0 dBu (0.78 V RMS) for full output, 32 dB gain
Total Harmonic Distortion
Typically <0.08% (predominantly 2
nd
harmonic) at any
frequency between 20 Hz and 20 kHz and any power level up
to 120 W, 8Ω load.
<1.0% at full rated power
Input Impedance
≥50 kΩ
Output Impedance (Damping Factor)
40 mΩ at 1 kHz (equivalent to a damping factor of 250)
Bandwidth
3 Hz – 150 kHz (-3 dB, ref. 1 W @ 1 kHz) unbalanced inputs
3 Hz – 80 kHz (-3dB, ref. 1W @ 1 kHz) balanced inputs
Size
17.2” wide, 17” deep, 6” high
Weight
34 lbs. (42 lbs. shipping weight)
Power Consumption (120 V, 60 Hz)
70 - 160 W typical, 600 W maximum, <1 W standby
Tube Complement
5751 (or 12AX7) x2, 12AT7 x4, 12BH7 x1
Output Transistors
MJL3281A x4, MJL1302A x4
Model and Serial
Post Burn-In Checkout
Offset Right
Offset Left
Power at Clipping (8Ω, 1kHz, 1% THD), Right
Power at Clipping (8Ω, 1kHz, 1% THD), Left
Total Harmonic Distortion (112.5 W [30 VRMS]
into 8 Ω, 1kHz), Right
Total Harmonic Distortion (112.5 W [30 VRMS]
into 8 Ω, 1kHz), Left
Date