Taylor 1380 Instruction Manual

Manual is about: 24 Hour Forecaster

Summary of 1380

  • Page 1

    The taylor® 24 hour forecaster will provide you with actual cur- rent temperatures. Predict the weather conditions for the next 24 hours as well as your local television weatherperson! Taylor uses the temperature and changes in relative humidity levels to forecast the upcoming day. Plan the day with...

  • Page 2: Low Battery Warning

    Low battery warning replace both batteries when the “ ” icon appears or readings become dim or irregular. To set up the weather forecaster for use 1. After battery installation, the current weather icon flashes. 2. Press “up” or “down” to select the weather icon you believe most closely reflects the...

  • Page 3

    3. Press “time/date” to select the displayed weather icon. The icon stops flashing. Icon flashes during setup, then steady when set 4. Please allow at least 6 hours for the unit to read weather conditions and start to forecast. During this time, the current temperature will update, but all other rea...

  • Page 4

    4 5. Use the attached cable with sensor probe to measure outdoor weather conditions. Open a window and run the cable through the opening so that the sensor probe at the end of the cable is exposed to the outdoor temperature and weather conditions. Locate the sensor probe in a dry, shaded area. Di- r...

  • Page 5: To Set Clock and Date

    5 to set clock and date 1. Press and hold “time/date” for 2 seconds, then release. 2. Press “up” or “down” to change the hours. Press “time/date”. 3. Press “up” or “down” to change the minutes. Press “time/date”. 4. Press “up” or “down” to switch between a 12 or 24 hour clock. Press “time/date”. 5. ...

  • Page 6

    To read the weather forecaster 6 (1) current outdoor temperature (2) low battery indicator (3) current weather condition icon (4) clock/date (5) 3 forecast displays over 24 hours: morning (7am-11am) afternoon (11am-3pm) evening (3pm-9pm) forecast screens will rotate as time periods change, with the ...

  • Page 7: Problem Solving

    7 problem solving 1. If the lcd readout is faint, replace the batteries. 2. If temperatures do not display on the base unit or seem irregular: a) check to see the cable is not crimped, severed or otherwise damaged; b) relocate sensor probe if it is obstructed from weather condi- tions or in contact ...

  • Page 8: Precautions

    Temperature/forecast updates the sensor probe sends temperature and weather condition infor- mation to the base unit. After battery installation, allow 6 hours for the unit to analyze weather conditions and report forecasts. Weather readings will update as follows: • current temperature updates appr...

  • Page 9: Specifications

    Specifications range of temperature measurement: -40°f to 158°f (-40°c to 70°c) resolution: 1° for temperature power: 2 aaa alkaline batteries 5 weather forecast icons: sunny, partly cloudy, cloudy, rain, snow 3 forecast time displays over 24 hours: morning (7am-11am) afternoon (11am-3pm) evening (3...