1. DL manuals
  2. Taylor
  3. Weather Station
  4. 1381
  5. Instruction Manual

Taylor 1381 Instruction Manual

Manual is about: Today’s Weather 24 Hour Forecaster

Summary of 1381

  • Page 1

    Get actual current temperatures and predict the weather conditions for the next 24 hours as well as your local television weatherperson! Taylor uses the temperature and changes in relative humidity levels to forecast the upcoming day. Plan the day with confidence with taylor ® today’s weather. Pleas...

  • Page 2

    Set current weather conditions 1. After battery installation, the current weather icon flashes. 2. Press “up” or “down” to select the weather icon you believe most closely reflects the current conditions in your area. (partly cloudy is the default setting). 3. Press “time/date” to select the display...

  • Page 3

    4.The selected weather icon appears on all screens. (the temperature and forecast readings update after remote sensor is added.) 3 install batteries into remote sensor *important: install the remote sensor batteries after installing the base unit batteries for proper signal connection. Remote sensor...

  • Page 4: Set Up Remote Sensor

    Set up remote sensor 1. After installing the batteries into the base unit and the remote sensor, place the units close together for best setup connection. 2. Press the “sync” button on the back of the base unit to send a transmission signal to the remote sensor. Allow a few minutes for a connection ...

  • Page 5

    5 only the current temperature will update during first 6 hours temperature forecasts and weather icons stay identical while analyzing 1st forecast. 5. When the units begin to forecast weather conditions, all tem- perature and weather screens will update with new forecasts. 6. The remote sensor will...

  • Page 6: To Set Clock and Date

    6 to set clock and date 1. Press and hold “time/date” for 2 seconds, then release. 2. Press “up” or “down” to change the hours. Press “time/date”. 3. Press “up” or “down” to change the minutes. Press “time/date”. 4. Press “up” or “down” to switch between a 12 or 24 hour clock. Press “time/date”. 5. ...

  • Page 7

    To read the weather forecaster 7 (1) current outdoor temperature (2) transmission signal icon (3) remote sensor low battery indicator (4) current weather condition icon (5) clock/date (6) base unit low battery indicator (7) 3 forecast displays over 24 hours: 7 remote sensor – replace both batteries ...

  • Page 8: Tips

    Setup: place the base unit as close as possible to the remote sensor dur- ing setup. This will ensure the best reception of signals as you set up your wireless forecaster. Location: position the base unit and remote sensor within the effective transmission range of 100 feet (30 meters). Place the ba...

  • Page 9: Problem Solving

    Problem solving 1. If the lcd readout is faint, replace the batteries. 2. If outdoor temperature does not display on the base unit: a) press the “sync” button to trigger a signal from the base to the remote; b) relocate remote sensor if it is obstructed from weather condi- tions or in contact with a...

  • Page 10

    10 over- or under- temperature range displays: if the temperature is outside the unit’s temperature range of -4°f to 158°f / -20°c to 70°c (with use of lithium batteries), the lcd will show “hh” (higher than the temperaturerange) or “ll” (lower than the temperature range). When temperatures are with...

  • Page 11: General Information

    Television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --reorient or relocate the receiving antenna. --increase the separation between the equipment and receiver. Modificat...

  • Page 12: Specifications

    Specifications range of temperature measurement: base unit (indoor only): 14°f to 122°f (-10°c to 50°c) remote sensor: with lithium batteries: -4°f to 158°f (-20°c to 70°c) with alkaline batteries: 14°f to 122°f (-10°c to 50°c) resolution: 1° for temperature power: base unit – 2 aaa alkaline batteri...