1. DL manuals
  2. Taylor
  3. Weather Station
  4. 1383
  5. Instruction Manual

Taylor 1383 Instruction Manual

Manual is about: Today's weather 24 hour forecaster

Summary of 1383

  • Page 1

    Get actual current temperatures and predict the weather conditions for the next 24 hours as well as your local television weatherperson! Taylor uses the temperature and changes in relative humidity levels to forecast the upcoming day. Plan the day with confidence with taylor ® today’s weather. Pleas...

  • Page 2

    Set current weather conditions 1. After battery installation, the current weather icon flashes. 2. Press “up” or “down” to select the weather icon you believe most closely reflects the current conditions in your area. (partly cloudy is the default setting). 3. Press “time/date” to select the display...

  • Page 3

    4.The selected weather icon appears on all screens. (the temperature and forecast readings update after remote sensor is added.) 3 install batteries into remote sensor *important: install the remote sensor batteries after installing the base unit batteries for proper signal connection. Remote sensor...

  • Page 4: Set Up Remote Sensor

    Set up remote sensor 1. After installing the batteries into the base unit and the remote sensor, place the units close together for best setup connection. 2. Press the “sync” button on the back of the base unit to send a transmission signal to the remote sensor. Allow a few minutes for a connection ...

  • Page 5

    5 only the current temperature will update during first 6 hours. Temperature forecasts and weather icons stay identical while analyzing 1st forecast. 5. After the first 6 hours, when the units begin to forecast weather conditions, all temperature and weather screens will update with new forecasts. 6...

  • Page 6: To Set Clock and Date

    Reading the weather forecaster 1) current outdoor temperature at remote sensor location 2) current outdoor humidity at remote sensor location 3) current weather condition icon 4) current indoor temperature 5) clock/date 6) base unit low battery indicator 7) transmission signal icon 8) remote sensor ...

  • Page 7: Additional Features

    7 additional features 7 low battery warning base unit – replace both batteries when the “ ” icon appears on the right side of the screen. °c/°f selection press the “c/f” button on the back of the base unit to switch between fahrenheit and celsius temperatures. Backlight press the backlight button on...

  • Page 8: Batteries:

    Batteries: lithium batteries are recommended for the remote sensor, since alkaline batteries may freeze or otherwise become damaged in extreme temperatures. The sensor will function with alkaline batteries, but are best suited for milder climates. (see specifications.) important: though the remote u...

  • Page 9: Problem Solving

    Problem solving 1. If the lcd readout is faint, replace the batteries. 2. If outdoor temperature does not display on the base unit: a) press the “sync” button to trigger a signal from the base to the remote; b) relocate remote sensor if it is obstructed from weather condi- tions or in contact with a...

  • Page 10

    10 transmission information the remote sensor sends temperature and weather condition information to the base unit. After installing batteries into both units, allow 6 hours to analyze weather conditions and report forecasts. Weather readings will update as follows: • current temperature updates app...

  • Page 11: Precautions

    Precautions 1. Always read the instruction manual before operating this product. 2. The base unit is intended for indoor use only. It is not sealed against moisture and could be damaged if used outdoors. 3. Do not immerse the base unit in water. If you spill liquid on it, dry immediately with a soft...

  • Page 12: Specifications

    Specifications range of temperature measurement: base unit (indoor only): 14°f to 122°f (-10°c to 50°c) remote sensor: with lithium batteries: -4°f to 158°f (-20°c to 70°c) with alkaline batteries: 14°f to 122°f (-10°c to 50°c) resolution: 1° for temperature outdoor humidity: 20% - 99% rh power: bas...