Summary of 1479
Page 1
1 1479 / 532 / 817 wireless thermometer with remote pager plus timer instruction manual.
Page 2: Wireless
2 thank you for purchasing a taylor ® wireless thermometer with remote pager plus timer this product helps to eliminate over-cooking or under- cooking foods. Presetting the thermometer to the recommended cooking temperatures and/or cooking times is simple and ensures that food will be cooked to your...
Page 3: On/off Operation
On/off operation 1. Place the base unit as close as possible to the remote sensor. This will ensure easy synchronization between the base and remote. After set up is complete, keep the units within effective transmission range (within 200 feet). 2. Turn on the base unit first by pressing the on/off ...
Page 4: Regulations.
6. If transmission is interrupted, the ready light will stop blinking and the remote will vibrate 3 times every 30 seconds. To synchronize the units again, place the base and remote near each other and press and hold the “ ” button located on the back of the base unit. 7. Auto off feature to conserv...
Page 5
4. Do not stick to surfaces that exceed 200°f (100°c). Thermometer programming operation 1. Your thermometer is preset to read temperatures in fahrenheit. To switch to celsius, push the switch on the back of the base unit to ºc. 2. If necessary, press the “on/off” buttons. The default setting “beef”...
Page 6: General Cooking Procedures
6. Press “select” when the desired temperature is displayed. The set temperature digits stop flashing. The unit will beep, indicating the thermometer is set. 7. To change the programming, press the meat button and repeat the steps above. General cooking procedures 1. Preheat the grill or oven to des...
Page 7
• when the current temperature is within 20 degrees of the target temperature, the remote will beep 3 times, vibrate and flash; the base will beep 3 times and flash. Note: the unit uses to different beep tones to help you identify between thermometer and timer notifications. Only the remote will vib...
Page 8: Timer Operation
Timer operation this unit is also equipped with a convenient timer. It can operate as an independent timer or work along with the thermometer function. 1. If necessary, turn the base and remote on (see on/off operation). 2. Press the “timer/thermometer” button. The timer digits flash. 3. Press the “...
Page 9: Clock Feature
• 5 minutes before the time is up, the remote will beep 5 times, vibrate and flash. The base will beep 5 times and flash. • when the timer reaches zero, the units consistently beep, vibrate and flash (only remote vibrates) 7. Press the “start/stop” button on the base unit to stop the alarm and timer...
Page 10: Care and Precautions
Care and precautions 1. Always wear a heat resistant glove when touching the metal probe or cord during or just after cooking. Do not touch with bare hands! 2. Keep the metal probe and cord away from children. 3. Sterilize metal probe each time before use. 4. Do not expose the thermometer to: water,...
Page 11: Transmission Collision
Transmission collision signals from other household devices, such as doorbells, home security systems and entry controls, may interfere. This is normal and does not affect the general performance of this product. The trans- mission will resume once the interference recedes. Note: this device complie...
Page 12
Questions about this product: if service is required, do not return to retailer. For service call 1(866) 843-3905 from 7:30 am to 4:30 pm, mountain standard time, monday through friday. To assist us in serving you, please have the model number and date of purchase available. Due to continuous produc...
Page 13: One Year Limited Warranty
One year limited warranty taylor® warrants this product to be free from defects in material or workmanship for one (1) year from date of original purchase for original purchaser, excluding batteries. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unautho...