1 by 1479/1479-21/532/532-77 customer service information please read! For your questions regarding this product, please contact us at: taylor precision products 2220 entrada del sol, suite a las cruces, new mexico 88001 1-866-843-3905 www.Taylorusa.Com please contact us before returning to retailer...
2.
3 thank you for purchasing a taylor ® wireless thermometer with remote pager plus timer this product helps to eliminate over-cooking or under-cooking foods. Presetting the thermometer to the recommended cooking temperatures and/or cooking times is simple and ensures that food will be cooked to your ...
On/off operation 1. Place the base unit as close as possible to the remote sensor. This will ensure easy synchronization between the base and remote. After set up is complete, keep the units within effective transmis- sion range (within 200 feet). 2. Turn on the base unit first by press- ing the on/...
7.Auto off feature to conserve battery power:the base unit will au- tomatically turn off after 30 minutes if there is no change in tem- perature or no buttons are pressed.The remote unit will vibrate then automatically turn off if the transmission signal is lost for 5 minutes.The remote unit will al...
3. Press the “meat” but- ton to scroll through the meat choices. Press the “select” button to select the displayed meat type.The default taste setting “medium” flashes. 4. Press the “taste” but- ton to scroll through the taste choices. Press the “select” button to select the displayed taste.The set ...
General cooking procedures 1. Preheat the grill or oven to desired cooking temperature. Place the food in the oven or grill. 2. Sterilize the metal probe by inserting it into an appropriate solution such as boiling water for several minutes. Make sure the sensor plug on the end of the cord is plugge...
• when the current temperature is within 10 degrees of the target temperature, the remote will beep 5 times, vibrate and flash.The base will beep 5 times and flash. • when the current temperature and target temperature are equal (indicating the food is done), the units consistently beep, vibrate and...
Timer operation this unit is also equipped with a convenient timer. It can operate as an independent timer or work along with the thermometer function. 1. If necessary, turn the base and remote on (see on/off operation). 2. Press the “timer/thermometer” button. The timer digits flash. 3. Press the “...
6.As time progresses, the base and remote units will signal timer alerts in the following manner: • 10 minutes before the time is up, the remote will beep 3 times, vibrate and flash. The base will beep 3 times and flash. Note: that the unit uses to different beep tones to help you iden- tify between...
7. Press the “start/stop” button on the base unit to stop the alarm and timer. 8. The timer will time up to 39 hours, 59 minutes and 59 seconds. (the seconds will appear when remaining time is less than one minute). Clock feature to program the clock: 1. While the base unit is off, press the “select...
5. Do not expose the probe directly to flames. Do not put the probe in foods to exceed cooking temperatures of 500°f (260°c), as this may reduce the life and accuracy of the thermometer sensor. 6. Do not use this thermometer in a microwave oven. 7. Moisture inside the plug-in opening of the thermome...
Transmission collision signals from other household devices, such as doorbells, home security systems and entry controls, may interfere.This is normal and does not affect the general performance of this product.The transmission will resume once the interference recedes. Note: this equipment has been...
One year limited warranty taylor® warrants this product to be free from defects in material or workmanship for one (1) year from date of original purchase for original purchaser. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/...
