- DL manuals
- Taylor
- Weather Station
- 1524
- Instruction Manual
Taylor 1524 Instruction Manual
Summary of 1524
Page 1
By 1524 1 weatherguide ™ system with remote sensor instruction manual.
Page 2: Welcome To Thetaylor
Welcome to thetaylor ® weatherguide system. Simple, reliable, accurate…it allows you to monitor indoor or outdoor locations from one room. The base unit reads indoor conditions, while the remote sensor wirelessly reports outdoor weather conditions back to the base unit for an all-in-one weather disp...
Page 3: Base Unit
To power your weatherguide ™ base unit your weatherguide™ base unit is powered by 2 aaa batteries (not included). Remove the battery compartment cover located on the back of the unit. Install 2 aaa batteries. Replace the battery compart- ment cover. Important: power the base unit before installing b...
Page 4
Transmission successful 4 if the transmission is successful, the remote sensor readings and a icon will appear on the base unit. If dashes are still displayed on the receiver unit, press the tx button again. Replace the remote’s battery compart- ment cover. The remote will automatically transmit rea...
Page 5: Keyhole
Keyhole table stand 5 how to display your weatherguide™ table top – use the table stand on the back of the base and remote sensor units wall – use the keyhole on the back of the base and remote sensor units. Base unit remote sensor base unit location – place the unit indoors in a well-ventilated loc...
Page 6
How to read your weatherguide™ the base unit displays indoor conditions from its location. The remote unit will transmit weather readings from its location back to the base unit. Alternately, the remote sensor’s probe cord may be used. Plug the probe cord into the rubber plug on the remote sensor.Al...
Page 7: Temperature Readings
Auto scroll feature – the base unit can be set to automatically scroll through read- ings. To activate auto scroll, press the “channel” button on the back of the base unit until the auto scroll symbol appears on the lcd. The base unit will automatically display base and remote readings for 10 second...
Page 8: To View Minimum/maximum
To view minimum/maximum temperature readings your weatherguide™ will store the last recorded high and low temperatures over a 24 hour period.The 24 hour period starts when the batteries are installed. 1. Press the “min/max” button once to see the highest temperature of the day. 2. Press the “min/max...
Page 9: Low Battery Indicator
Temperature trend indicators your weatherguide™ will indicate if temperatures are rising, falling, or steady. Indicates rising temperatures readings (temperatures have gone up more than 2 degrees in an hour) indicates steady temperature readings indicates falling temperatures (tempera- tures have go...
Page 10: Trouble-Shooting
Trouble-shooting disconnected signals if the receiver unit does not receive a transmission from a remote chan- nel for 1 hour, the display will show dashes.To correct this problem: 1. Check that the remote is properly positioned, within the appro- priate transmission range. Transmissions are vastly ...
Page 11: Transmission Collision
Transmission collision signals from other household devices, such as doorbells, home security systems and entry controls, may interfere.This is normal and does not affect the general performance of this product.The transmission will resume once the interference recedes. Note: this equipment has been...
Page 12: Precautions
Precautions 1. The receiver is intended for indoor use only. It is not sealed against moisture and could be damaged if used outdoors. 2. Do not immerse the unit in water. If you spill liquid on it, dry im- mediately with a soft, lint-free cloth. 3. Do not clean the unit with abrasive or corrosive ma...
Page 13: Specifications
Specifications range of temperature measurement: receiver unit (indoor only): 14°f to 158°f (-10°c to 70°c) remote unit: -40°f to 158°f (-40°c to 70°c) resolution: 0.1 degree for temperature temperature trends – rising, falling or steady minimum/maximum daily temperature records low battery indicato...
Page 14: One Year Warranty
One year warranty this product is warranted against defects in materials or workmanship for one (1) year from date of original purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Should this product re- quire s...
Page 15
15 made to our exact specifications in china. © 2008 taylor precision products and its affiliated companies, all rights reserved. Taylor® and leading the way in accuracy® are registered trademarks of taylor precision products and its affiliated companies. Weatherguide™ is a trademark of taylor preci...
Page 16
1524 8.08.