Wireless multi-zone digital thermometer with alarm clock model no. 1542 sf version instruction manual.
Features and specifications base station • indoor / outdoor rf temperature • monitors temperature at up to 4 locations (additional sensors required) • indoor / outdoor temperature displayed in °f or °c • memory function to recall highest/lowest temperature readings • indoor temperature range: 14°f t...
Battery installation and setup • position the remote sensor near the base station. • open the battery compartment at the back of the base station and insert (2) aaa batteries according to the polarity markings. • replace the battery compartment cover. • press the up c/f button at the back of the uni...
The sensor wire is not included with the unit and can be purchased separately by contacting taylor customer service at 1-866-843-3905. Operating instructions 12/24 hour clock selection in the normal time display mode, press the down 12/24 button to display the time in 12 hour or 24 hour format. (in ...
In the normal time display, press the mode button to choose the alarm (a1 or a2) that you want to activate. Press set to activate (the alarm bell icon and 1 or 2 will show). The alarm will sound at the time you have entered. Silencing the alarm • when the alarm sounds press any button on the front o...
• press alert to activate or de-activate the alert function. When the alert function is activated, both the high and low limit icons will show. Using the countdown timer • in the normal display mode, press mode 3 times to display the countdown timer. Timer will show on the display. • press the set b...
And on, the user is encouraged to try to correct the interference by one of more of the following measures: • reorient or relocate the receiving antenna. • increase the separation between the equipment and the receiver. • connect the equipment into an outlet on a circuit different from that to which...
