1. DL manuals
  2. Taylor
  3. Guitar
  4. 200 Series 210
  5. Supplementary Manual

Taylor 200 Series 210 Supplementary Manual

Summary of 200 Series 210

  • Page 1

    The action and intonation on the taylor solidbody are set to our precise standards using .010-.046 gauge electric guitar strings. These instructions are for those who wish to alter the factory settings. All adjustments should be done by a qualified repair technician. The taylor solidbody: action and...

  • Page 2

    Tools you’ll need: • 3/8(10mm)socketornutdriver(anchornuts)•3/32allenwrench(actionheightadjustmentscrews) • .050allenwrench(intonationsetscrews)•1/16allenwrench(saddlelockingscrews) bridge components the bridge consists of three main parts: 1. Stoptailassembly: the stoptail can be adjusted up or dow...

  • Page 3

    Adjusting the bridge height: step-by step instructions note: the strings do not need to be loosened to make bridge height adjustments. To access the action height adjustment screws, remove the four cover plate screws (fig 1), then remove the plate. Raising the action 1) using a 3/8 (10 mm) socket or...

  • Page 4

    Intonation adjustments all six strings can be adjusted forward and backward to set perfect intonation for your playing style. Intonation quick tips • theactionshouldbeatthedesiredheightbeforeintonationbegins. • theneckreliefshouldbecorrectfortheplayingstylebeforeintonationbegins. • newstringsshouldb...