Taylor 5594 Instruction Manual
5594
Body Fat Analyzer
and Scale
Instruction Manual
NOTE: If a memory already has data saved in it, a “ ” symbol appears
in the lower corner of the LCD. You may use the steps listed above to
save over the old data, or press up/down to move to an empty memory
location.
To Access and Use Memory Data:
1. Press and hold (SET) button for 3 seconds while the power is off. The
scale will enter Memory Recall mode.
2. The last used memory number will
appear on the LCD for 1 second.
The data stored in that memory
number will toggle on the screen.
(If no data is stored, the default val-
ues will toggle on the screen.)
3. Press (UP) / (DOWN) button to
scroll to the desired memory number.
4. When your memory number
appears on the LCD, press (SET) to
select. A “beep” will sound. Your data
will toggle on the screen.
5. Step on the scale with bare feet. Stand still while the scale measures
your weight.
6. Your weight will display for 2 seconds. Continue to
stand still on the scale.
7. The scale will start to measure
body fat % and body water %. The
LCD will show spinning zeroes
(“0000”) while the scale computes.
8. A “beep” sounds
when measurement
is complete.
Remain on the
scale. The body fat %, body water % and weight will appear in sequence
6 times each.
9. The scale turns off automatically.
To Clear Memory:
1. Follow steps 1-3 in To Access and Use Memory Data.
2. If the selected memory is occupied (indicated by a “ ” symbol in the
lower corner of the LCD), press (SET) button to clear the data in the
selected Memory.
NOTE: If you are having a problem operating this Analyzer please call
866-843-3905 from 7:30 am to 4:30 pm, Mountain Standard Time,
Monday through Friday.
General Information about Body Fat and Body Water
1. Ideal body fat/body water content is not the same for all people. Age,
sex, and heredity are variables in this measurement. Consult your
physician to determine what levels are most ideal for you.
Male
Female
Age
Low
Normal
High
Age
Low
Normal
High
06-12
<7
7.1-18
18.1>
06-12
<7
7.1-19
19.1>
13-19
<8
8.1-19
19.1>
13-19
<20
20.1-31
31.1>
20-39
<9
9.1-20
20.1>
20-39
<21
21.1-32
32.1>
40-59
<11
11.1-22
22.1>
40-59
<23
23.1-34
34.1>
60-99
<13
13.1-24
24.1>
60-99
<25
25.1-36
36.1>
2. The optimal %TBW of an individual varies according to age and
gender. The table as follows may be used as a guide:
Body water healthy range percentages
female
male
age 6-12
58-70
60-73
athlete
female male
age 12-99
42-61
46-66
age 12-99
56-71 60-73
3. It is recommended to measure body fat, body water or weight at the
same time period daily.
Please note that body fat contains some
body water weight. Thus, body fat and body water percentages
will not add up to 100%.
4. Use this product without clothing for best accuracy. Clothes can vary
in weight and affect the percentage calculation.
5. Feet must be bare and clean. For best readings they should also
be slightly damp.
Level of Hydration
This analyzer measures your weight, the electrical impedance between
your feet, and combines those readings with the information you input
(Height, Age, Gender, Normal/Athlete). It then automatically calculates
your body fat and body water percentages.
Your level of hydration (water content) varies throughout the day and
affects your impedance measurement. If you are dehydrated, there is a
greater chance for fluctuation in the body fat and body water percentage
displayed by this analyzer than when you are fully hydrated.
For best results, choose a consistent time to use this analyzer, such as in
the morning. By establishing the pattern of your body’s fluctuation over a
period of one month, you can determine your average level of body fat
and body water. Women will have more fluctuation in water content than
men and need to monitor their reading over a longer time period to
establish a personal average. You must determine this as a reference
point before measuring progress in a health program.
You must wait several hours before taking a body fat reading when:
drinking coffee or alcohol, taking diuretic medications, or exercising.
These all affect your level of hydration and the accuracy of this analyzer.
Caution
BIA (Bioelectrical Impedance Analysis) method determines your body fat
percentage by sending a harmless signal through the body. Do not use
this product if you have a pacemaker or other internal medical
device. When in doubt, contact your physician.
This analyzer will give accurate body fat readings for a majority of peo-
ple, but is not calibrated for use by the following groups:
Children: Anyone under the age of 18 years
Pregnant Women
Specifications
• Uses BIA (Bioelectrical Impedance Analysis) to determine body fat and
total body water percentage
• Uses high precision strain gauge technology to determine weight
• Weight Capacity: 350Lb or 160Kg or 25 St
• Weight Graduation: 0.2Lb or 0.1kg
• Body Fat and Body Water Graduation: 0.1%
(in the range from 3% - 50%)
• Height Range: 2’ 8” – 7’ 3” (80 – 220cm)
• Age Range: 6-100 years
• Measures weight, body fat and body water simultaneously in about 10
seconds
• Weight-only feature with automatic step on
• Data can be stored for up to 4 individuals
• Athlete or Normal mode selection (not applicable for ages under 18)
• User selectable units of measure (lb), (kg), (st)
• Low battery indicator
• Auto-off function after 15 seconds of nonuse for power saving
• Operates on 4 AAA alkaline batteries (not included)
Precautions
1. OVERLOAD WARNING: the maximum weight capacity of this scale is
350 lbs / 160 kgs / 25 st. Remove the weight immediately when
the scale displays “Err2”; otherwise, permanent damage to the scale
will occur.
2. The product is intended for home / consumer use only; it is not
intended for professional use in hospitals or medical facilities.
3. Do not disassemble the product. Other than replacing the batteries, it
contains no user serviceable parts.
4. Clean after use with a lightly dampened cloth. Do not use solvents or
immerse the product in water.
5. Your scale contains sensitive electronic parts. Avoid rough treatment.
Do not drop, kick, or jump on it. Treat it with care to ensure the best
performance.
6. Do not store the scale where you store cleaning chemicals. The
vapors from some household products may affect the electronic
components of your scale. Do not store the scale on its side.
7. This scale is a sensitive weighing device. To prevent run down of the
battery, do not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak.
Remove the batteries if the scale will not be used for a long period of
time.
Trouble Shooting
1. You must have bare feet to make this measurement. To get the most
accurate and consistent reading, wipe your feet with a damp cloth,
leaving them slightly damp before stepping on the scale.
2. Display Err0 Initialization error. To correct, step off the scale. Press on
the platform. The display will show “----, then “0000”, and turn off.
Repeat measurement.
3. Display Err1 Instability error. Step off and back onto the scale, stand-
ing still while your weight computes.
4. Display Err2 Overload Warning. The maximum weighing capacity of
the scale has been exceeded. Remove the weight immediately; other-
wise, permanent damage to the scale will occur.
5. Display Err3 Body fat percentage is beyond the range. Do not wear
shoes or socks during measurement. Cleaning bottom of bare feet with
a damp cloth and leaving them slightly damp may help to improve the
contact. Repeat measurement.
6. Display Err4 Body water percentage is beyond the range. Cleaning
bottom of feet with a damp cloth and leaving them slightly damp may
help to improve the contact. Repeat measurement.
7. The condition of the skin on the bottom of your feet can affect the
To Clear Memory (Cont)
reading. The natural effects of aging or activity can make this skin
hard. Take the reading with clean, slightly damp feet for best accuracy.
NOTE: If you are having a problem operating this Analyzer please call
866-843-3905 from 7:30 am to 4:30 pm, Mountain Standard Time,
Monday through Friday.
Lifetime Warranty
This scale is warranted against defects in materials or workmanship for
the life of the original purchaser from date of retail purchase. It does not
cover damages or wear resulting from accident, misuse, abuse, commer-
cial use, or unauthorized adjustment and/or repair.
Should this scale require service (or replacement at our option) while
under warranty, please pack the item carefully and return it prepaid,
along with store receipt showing date of purchase and a note explaining
reason for return to:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
USA
There are no expressed warranties except as listed above. This warranty
gives you specific legal rights, and you may have other rights which vary
from state to state.
If service is required, do not return to retailer. For service call 1 (866)
843-3905 from 7:30 am to 4:30 pm, Mountain Standard Time, Monday
through Friday. To assist us in serving you, please have the model num-
ber and date of purchase available.
© 2006 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor®
and Leading the Way in Accuracy® are registered trademarks of Taylor Precision
Products and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
Not for legal trade.
www.taylorusa.com
5594 7.08
Levels of Hydration (Cont)