Taylor 7344 Instruction Manual
CP7344 8.11
There are no express warranties except as listed above. This warranty gives
you specific legal rights, and you may have other rights which vary from
state to state.
For additional product information, or warranty information in Canada or
elsewhere outside the USA, please contact us through www.taylorusa.com.
©2011 Taylor Precision Products and its affiliated companies, all rights reserved.
Taylor® and Leading the Way in Accuracy® are registered trademarks of Taylor
Precision Products and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
Not legal for trade.
www.taylorusa.com
This scale is warranted against defects in materials of workmanship for five
(5) years (excluding batteries) for the original purchaser from date of retail
purchase. It does not cover damages or wear resulting from accident,
misuse, abuse, commercial use, or unauthorized adjustment and/or repair.
Do not return to retailer. Should this scale require service (or replacement at
our option) while under warranty, please pack the item in the original
packaging and return it prepaid, along with store receipt showing date of
purchase and a note explaining reason for return to:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001 USA
Weight Management
Electronic Scale
General Operation and Weight Only Operation
Five (5) Year Limited Warranty
Precautions
Weight Tracking Operation
7344
Leading the Way in Accuracy
®
Thank you for purchasing a Taylor® Electronic Scale. All of our precision
instruments for weight measurement are engineered and designed to meet
the highest quality standards …to assure you years of uncompromising
accuracy and consistently dependable, convenient performance. Please
read this instruction manual carefully before use. Keep these instructions
handy for future reference.
1. There are plastic strips under the Lithium battery cover to prevent battery
drain in shipping. Please remove the strips before continuing with these
instructions. Also, some models have a static cling label on the lens to
prevent scratching. Please remove before use.
2. Your scale has been set at the factory to read weight in pounds. You may
select kilograms or stone units of measurement by moving the slide switch
within the battery compartment of the scale.
3. Place scale on flat, hard surface. Carpeted or uneven floors may affect
accuracy.
4. Step on the scale (disregarding the reading) and step off. This process
insures the scale is set and is now ready for use. Do this whenever the
scale is moved. At all other times step straight onto the scale.
5. Your Taylor® Weight Management Scale will operate as a basic weight-
reading scale. No special programming steps are required. Simply step
onto the scale platform and remain still. The display will show “0.0”, then
count up to your weight. The display will flash three times when the
weight is locked. Your weight is now displayed.
6. The scale will turn off automatically.
Your scale is equipped with Weight Tracking software that computes the
difference between your current weight reading and your previous weight
reading. Up to four individuals may track their weight changes by activating
one of the buttons numbered 1 through 4, located below the display.
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use
a mild soap. Never use detergents, excess water, treated cloths, harsh
cleaning agents, or sprays. Do not attempt to lubricate or open scale
casing as this will void your warranty.
2. Although your scale is designed to be maintenance-free, it contains
sensitive electronic parts. Avoid rough treatment. Do not drop, kick, or
jump on it. Treat it with care to ensure the best performance.
3. This scale is designed to read weights between 25 and 400 lbs / 12 and
180kgs / 2 and 28 st, 8 lbs. To prevent damage, do not place more than
400lbs / 180 kgs / 28 st, 8 lbs on it.
4. Do not store scale where you store cleaning chemicals. The vapors from
some household products may affect the electronic components of your
scale. Do not store scale on its side.
5. This scale is an extremely sensitive weighing device. In order to prevent
run down of the battery, do not store anything on the scale.
6. “Err” display: Overload warning. The maximum weighing capacity has
been exceeded. Remove the weight immediately; otherwise, permanent
damage to the scale may occur.
7. “Lo” display: Low battery warning. Replace the batteries. Always replace
both batteries at the same time; do not mix old and new batteries.
8. Do not dispose of batteries in fire. Batteries may explode or leak. Remove
the batteries if the scale will not be used for a long period of time.