1. DL manuals
  2. Taylor
  3. Freezer
  4. C119
  5. Use And Maintenance Manual

Taylor C119 Use And Maintenance Manual

Summary of C119

  • Page 1

    Manual of use and maintenance manuel d’utilisation et d’entretien manual de uso y manutencion manuale d’uso e manutenzione electronic horizontal batch freezer turbines Électroniques horizontales mantecadoras horizontales electrÓnicas mantecatori orizzontali elettronici.

  • Page 2: 1 - English

    1 - english.

  • Page 3: English - 2

    English - 2 the machine is covered by guarantee according to the conditions reported in the seller’s in the following field, please write your machine serial number in capital letters serial number distributor’s stamp important we recommend to carefully and fully read the present manual before using...

  • Page 4: 3 - English

    3 - english congratulations on purchasing a machine taylor . The present manual, enclosed to the machine, is integrant and essential part of the machine and shall be delivered to the final user. Before performing any kind of operation, it is recommended to carefully study the reported instructions, ...

  • Page 5: English - 4

    English - 4 1 transport, handling and storage. 1.1 preliminary inspection the machine travels at the customer’s risk. In case packing is damaged, immediately inform the carrier. Immediately inform the carrier also in case of damage to the machine, even if you open the packing a few days after the de...

  • Page 6: 5 - English

    5 - english 2. Markings and graphics never touch the machine with hands and tools during production or maintenance and cleaning operations, without making sure that the machine is in stop position, the master switch is off and/or the multipolar plug disconnected. Taylor declines any liability for ac...

  • Page 7: English - 6

    English - 6 warning! Do not touch with hands. The following plate placed on the back of air-cooled machines shows that cleaning operations on the heat exchanger shall be carried out only by means of a brush or an exhauster. Warning! High voltage inside, danger of fulguration. The following plate is ...

  • Page 8: 7 - English

    7 - english 3. Field of use 3.1 field of use the batch freezers taylor are espressly designed and engineered for ice-cream batch freezing cycles. 3.2 limits of use never use the machine with variable supply voltage and/or more than +/- 10% of the value showed in the nameplate or when the feeder is d...

  • Page 9: English - 8

    English - 8 4. Safety devices shearing prevention system: realised by means of microswitches and safety circuit; it stops the machine when the door is opened and/or the grid on the hopper is lifted. Motor reliability of service: realized by means of overload relays with automatic reset. They protect...

  • Page 10: 9 - English

    9 - english 5. Operation 5.1 controls 1. Door it hermetically seals the cylinder during the working cycles. It can be easily removed for cleaning purpose. 2. Safety grid – hopper cover it allows the operator to charge the product under safe conditions. The cover prevents the batch to get in contact ...

  • Page 11: English - 10

    English - 10 5.2 control panel c119 1. Stop whatever working cycle is in progress, it stops the machine and cancels any function in progress. 2. Delivery by pressing the delivery pushbutton, only the agitator motor keeps on running. The door safety catch is enabled and the agitator motor stops runni...

  • Page 12: 11 - English

    11 - english 5.3 ice-cream production after the machine has been installed according to the instructions reported in chapter 3 and carefully cleaned and sanitized according to the instructions reported in chapter 6, proceed as follows to start up the ice-cream production: - check that the master swi...

  • Page 13: English - 12

    English - 12 - predetermined percentage value called consistency hysteresis set up by the manufacturer and programmable) and the ice- cream preservation phase begins, which can be stopped at any time with the delivery of the ice-cream. To obtain a drier ice-cream, it is advisable to make the compres...

  • Page 14: 13 - English

    13 - english 6. Maintenance 6.1 routine maintenance (addressed to the user) during production, cleaning and maintenance operations, never touch the machine with hands or tools without making sure that the machine has been disconnected from mains. In case of troubles, make sure that they are not caus...

  • Page 15: English - 14

    English - 14 6. Dismantle the door into pieces: • unscrew the handle adjusting knob • remove the handle • remove the delivery door and the spring • draw the or rings out 7. Pull the agitator and the stuffing box out: remove the scraping pads and wash them thoroughly. Use the cleaning rod to clean th...

  • Page 16: 15 - English

    15 - english 6.1.2 maintenance of agitator and gaskets the agitator blades are equipped with scraping pads made of atoxic plastic materials suitable for food industry. These components are subject to wear according to the characteristics of the employed mixture: with high sugar content and low fat p...

  • Page 17: English - 16

    English - 16 7 trouble-shooting 7.1 alarm management message description remedies the agitator motor power consumption is too high in comparison to the current transformer calibration. Check whether the agitator is blocked and the supply voltage correct. Stop pushbutton blinking and agitator motor s...

  • Page 19

    Taylor company, 750 north blackhawk boulevard, rockton, il 61072 telephone: (815) 624-8333 telex: 6871502 taylo fax: (815) 624-8000 www.Taylor-company.Com december, 2004 taylor all rights reserved cod. M04.37531.