TBB Power Trident Manual

Other manuals for Trident: Manual
Manual is about: smart

Summary of Trident

  • Page 1

    About tbb tbb power co.,ltd is a professional advanced power electronics manufacturer for marine, recycle energy applications, products of which includes battery charger, pure sine wave inverter etc. With belief of “pursuit of perfection”, we will keep supplying high quality products with innovation...

  • Page 2

    About tbb tbb power co.,ltd is a professional advanced power electronics manufacturer for marine, recycle energy applications, products of which includes battery charger, pure sine wave inverter etc. With belief of “pursuit of perfection”, we will keep supplying high quality products with innovation...

  • Page 3

    About this manual purpose and scope this manual describes tbb battery charger’s features, explains how they charge batteries, and provides procedures for their installation and gives some tips for the troubleshooting. But it does not mention the details of the particular brands of batteries. Please ...

  • Page 4: Contents

    Contents 1. General safety information ……………………………………………… 1 2. Introduction …………………………………………………………………… 2.1 description ……………………………………………………………… 2.2 trident features ………………………… ……………………… …… 2.3 indicator lights and settings on the front panel …………………… 3 installing guide ………………………………………………………… …… 3.1 ...

  • Page 5: General Safety Information

    5.3 protection features …………… ……………………………………… … 5.4 approvals ……………………………………………………………… 6 maintenance and troubleshooting …………………………………… 6.1 maintenance …………………………………………………………… 6.2 troubleshooting ………………………………………………………… general safety information 1. Before using the charger, read all instructions and...

  • Page 6: Instruction

    9. Do not disassemble the charger by yourself, which may result in a risk of electrical shock or fire. Always refer to professional electrician or our local distributor for support. 10. Always interrupt both the ac and dc connect when doing repair work 11. Do not expose lead acid batteries to a lit ...

  • Page 7

    No. Description 1 fan 2 bat ‘-’ (minus) 3 bat 1 4 bat 2 5 bat 3 6 temperature compensation socket 7 ac power cord 8 power switch 2.1.3 accessories temperature sensor 2.2 trident features trident is a smart battery charger designed specifically for following batteries: deep-cycle lead-acid batteries,...

  • Page 8

    2.2.2 inside timer set trident battery charger will switch from absorption stage to floating stage according to either the current drop to the nominal level or the timer exceed the setting value. 2.2.3 dip switches trident battery charger has dip switches for you to choose: charge mode, battery type...

  • Page 9

    Trident battery charger maintains the correct charging voltage for your battery when the ac line voltage drops as low as 185vac, or raised as high as 265 vac. A surge protector inside protects it from surges and spikes on the ac power line. Also, trident charger can work under 110vac. But the output...

  • Page 10

    Equalization is used for freedom batteries only, it can ensure that the individual cells within the batteries are fully charged, equal to one another, and that the electrolyte is stirred up by the gassing of the cells. But this function was strongly recommended not to use over once a month. Please d...

  • Page 11

    To protect the pcb from the moisture and corrosion, each trident battery charger has been sprayed by protective lacquer on pcb. 2.3 indicator lights and settings on the front panel led sign reason “power” off battery charger disconnected power supply failure incorrect power supply connection mains v...

  • Page 12: Installation Guide

    Installation guide 3.1 material list the unit is packed with the following materials: 1) user’s manual 2) temperature sensor please confirm the series number on the color box and the back of the product is the same. 3.2 preparing for installation 3.2.1 location please install trident battery charger...

  • Page 13

    Battery charger can work, but the output current will be automatically reduced to protect the charger from high internal temperatures. ÿ ventilated: allow at least 4 inches (10 cm) of clearance around all sides of the battery charger for air flow. Ensure the ventilation openings on the unit are not ...

  • Page 14

    Figure 3.1 installation guide for connecting bc and batteries mounting: mount the battery charger on a vertical surface, using the mounting holes provided. Mounting hardware should be corrosion resistant. Recommend to use all four mounting holes. Connecting dc wiring for batteries: warning all the b...

  • Page 15: Operation

    The circuit, unplugging from shore power and disconnecting any other power sources such as a generator. Grounding ÿ do not make an ungrounded connection. Improper connection can result in risk of an electric shock. ÿ battery charger must be grounded to reduce the risk of electrical shock. The ac inp...

  • Page 16

    Flooded off off off 14.4v 13.3v freedom off off on 14.8v 13.8v gel off on off 14.4v 13.8v agm off on on 14.2v 13.6v please read your manual of battery or consult the battery manufacture to set the output voltage accordingly. 4.2 charging batteries before you start to charge batteries, please read th...

  • Page 17

    Your freedom and spiral batteries. If you choose equalization mode, do not connect dc load. If the ambient temperature is below 80f (26.7℃), the voltage will increase because of the temperature compensation. 4.4 equalizing flooded batteries it is strongly recommended to read this section carefully b...

  • Page 18: Technical Specification

    Warning explosion hazard during equalization, the battery generates potentially flammable gases. Follow all the battery safety precautions listed in this guide. Ventilate the area around the battery thoroughly and ensure that there are no sources of flame or sparks in the vicinity turn off or discon...

  • Page 19

    Bank outputs 12v25a,24v12a & 12v40a, 24v20a – 3 isolated nominal battery voltage 12vdc for 12v models 24vdc for 24v models rated dc output current (total) 12v12a – 12adc; 12v25a – 25adc; 12v40a – 40adc; 24v06a – 6adc; 24v12a – 12adc; 24v20a – 20adc charge algorithms automatic 6 steps charging curves...

  • Page 20

    Maintenance and troubleshooting 6.1 maintenance warning risk of electrical shock trident battery charger contains no user serviceable components. Do not attempt servicing unless you are a qualified technician or electrician. Contact your dealer or the manufacturer for service information. Cleaning t...

  • Page 21

    Solution of water and baking soda. Routing checks periodically, check all wiring connections, dc and ac, to be sure they have not loosened or deteriorated. Also check all cable clamps to ensure they are tightly fastened. 6.2 troubleshooting display condition “power” indicator light is off battery ch...

  • Page 22

    Declaration ec of conformity manufacturer: tbb contact: unit 504, fukang bldg. #112 road jiahe, xiamen china 361004 tel: (86) - 592-5212299 fax: (86) - 592-5215978 description of the product name: trident smart charger type:bp1212:12v/12a bp1225:12v/25a bp1240:12v/40a the products identified above a...

  • Page 23

    22, 1993, concerning the approximation of the laws of the member states relating to the electric materials intended to be employed in certain limits of tension 2006/95/cee which retranscribes (73/23/cee modified by 93/68/cee) this conformity is supposed by the reference to the following specificatio...