Embedded dvr user’s manual stand alone type dvr system revision date : 2007. 2. 12 firmware version : ex-factory date : 050905 060829 061001 061201 070212 thank you thank you for purchasing our digital video recorder. Before operating the system, please read this user ’ s manual thoroughly and retai...
To reduce fire or shock hazard, do not expose the unit to rain or moisture. This installation should be made by a qualified service person and should conform to all local codes. Warning.
Cautions read before system operation follow these details to prevent material damage or personal injury. Signs of caution and warning warning: do not expose the product to fog, rain or too much humid to decrease danger from electric shock or fire. Caution: this sign indicates that the user could be...
1. Use the power cord, which is supplied or recommended by the supplier. The internal fan rotates at high speed and may cause an accident. 2. Do not drop, give strong vibration, or shock to the product. It may cause malfunction. 3. The air inhaler of the front panel and air outlet of the back panel ...
• index • chapter 1. Specification & system organization 1. Specification -------------------------------------------------------------- 4 2 . P r o d u c t c o n t e n t s l i s t - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 3 . S...
• index • chapter 6. Menu ⊙ g o t o m e n u - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 6 ⊙ g o t o g e n e r a l s e t u p - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ...
4 1. Specification video standard pal/ntsc audio 2-way audio conference monitor display real time:25 fps (pal), 30fps(ntsc) per camera covert camera operation programmable event/log search up to 1,000,000 for user login/out, configuration changes, remote access, connects/disconnects record schedulin...
5 network speed control 8 levels pre-alarm recording up to 5 sec., programmable per camera osd languages (subject to firmware version) english, spanish, chinese, russian, slovak, hungarian, turkish, german, french ethernet interface 10/100-base-tx, rj-45 remote function live view, live recording, se...
6 2. Product contents list please confirm the contents when open package. ① basic contents remote controller user manual & remote software cd aaa battery x 2 12v adaptor (tbk-7004sa lx only) power cable ② option contents hdd cd-rw usb momory dvr unit 1. Specification & organization.
7 3. System organization network camera #1-4 alarm sensor #1-4 relay out vcr vga monitor av monitor remote client pc image printer dvr video in video out tcp/ip alarm input/out remote controller cd-rw backup avi backup web client usb 1. Specification & organization.
8 2. Description ① jog shuttle : playback in different fast forward/backward speed, or frame by frame ② remote controller sensor input. ③ cd-rw : cd-rw device for backup. ④ usb port: usb port for use the usb memory stick and usb hdd backup ⑤ led indicator : indicate present system status information...
2. Description 9 1.2 front panel (8channel & 16channel models) ① jog shuttle : playback in different fast forward/backward speed, or frame by frame ② channel selection button : select channel or input password. Remote controller sensor input. ③ cd-rw : cd-rw device for backup. ④ power : switch on/of...
10 ① video in : bnc port for camera input. (4 camera connectable) ② loop back : camera loop out. (4 bnc port) ③ monitor out : output dvr video to av monitor. ④ spot out : output spot-out video to av monitor. ⑤ ntsc/pal : select ntsc or pal type. ⑥ vga out : output video to computer monitor via vga p...
2.2 rear panel (8channel & 16channel models) 2. Description 11 ① • do not power on the unit until all cable connections have been made. Tip ④ ⑤ ⑧ ⑩ ② ⑦ ③ ⑥ ⑨ ⑪ ⑫ ① video in : bnc port for camera input. ② loop back : camera loop out. 1-8 channel and 9-16 channel options. ③ monitor out : bnc main moni...
12 power system on/off menu: open menu return cancel setup or return to previous enter: apply setup change channel selection button (4ch available, #1~4 button) change screen mode open search mode ptz/iris mode • unused button’s description is omitted. • every button is operated same as front panel ...
• jumper setup as master or slave, following the instruction shown on hard disk. • jumper located next to hard disk’s data cable or rear side of hard disk. • if one hard disk is installed, set it as master. If two hard disk are installed, set second one as slave. ① jumper setup as master or slave 13...
14 ② after set jumper, attach hard disk with screw & bracket • connect power cable to hard disk ※ if one hdd is installed, connect it to the end of connector (black color) if add 1 more hdd, connect it to the middle connector (gray color) hdd bracket (max. For 2 hdd) ③ connect ide cable to hard disk...
• jumper setup as master or slave (refer to instruction shown on cd-rw). • if install one cd-rw at one ide cable, setup as master. If install one cd-rw & hdd at one ide cable, set cd-rw as slave. ① jumper setup as master or slave 15 1. Cd-rw & hard disk installation ‼ when install, exchange or remov...
16 ⑥ example of install cd rw & hdd ④ connect ide cable & power cable at the cd-rw hddx1 and cd-rw tip • when install master hdd, please connect 1 at ide1 port by master cable. • it means, master connector which 1 connected with ide1 cable must 1 connect with hdd (master). Ide2 ide1 for rear panel 3...
17 2. Camera connection connect camera at bnc port in back side panel. 3. Monitor connection connect monitor terminal or s-vhs terminal to monitor 4. Computer connection connect vga out terminal to computer monitor 5. Network connection connect ethernet terminal and network cable 3. Installation.
18 3. Installation example of connection ptz camera no. 14 pin connector 6. Alarm/relay/ptz connection (4 channel model) ① alarm alarm input - ‘ in1, in2, in3, in4 ’ : connect sensor input by channel ‘ gnd ’ : connect to ground ② relay alarm output – ‘no, nc’ : check alarm output type (normal open o...
19 8. Finishing installation press any button to start system after finishing installation ※ hard disk format - if new hard disk is not formatted, system can ’ t recognize the hdd. So it ’ s same situation as no hdd. Please format hdd when insert new hdd. (otherwise, system can only operate in displ...
1. System power on • press power button to start system. • after checking hard disk, display mode is shown. 1 • initial screen view mode is quad division mode and recording mode. 4. Display • check system status leds power : indicates system (on/off) record : indicates recording (on/off) network : i...
3. Display mode • user can select from a variety of multi-screen display modes (1/4/6/8/9/13/16ch) • the initial display mode is set to either 8ch or 16ch mode. 4. Display 2. Screen view selection • select one channel using the channel selection buttons (1-16). • use the display button to change the...
4. Display • each ptz function is manipulated by using a button on the front panel or on the remote controller. • some of the notations on the ptz menu are abbreviated. (p: pan, t: tilt, z: zoom, f: focus, i: iris) • all of the functions on the ptz menu are labeled along with the front panel/ contro...
2004/01/01 00:00:00 > ⊙ go to search mode • press [search] button and log-in as administrator or manager • use direction key to select menu • to open each menu by pressing [enter] button or [play] button • press [return] button to go back to previous mode. (move to previous menu or exit search mode ...
• control playing video ① basic playing mode (normal speed 1x forward playing) ② normal speed backward playing ③ pause video ④ fast forward (2 ~ 64 speed) ⑤ fast backward (2 ~ 64 speed) ⑥ same function as # ④ , ⑤ ※ press normal forward/backward button in pause mode, it will move to next/previous fra...
• date : indicate event occurrence order & date time : indicate event occurrence time event : indicate event contents & camera no. • event searching method ① user can search event by using direction key ② search event: press enter at selected event from event occurrence time ③ control video is the s...
26 ⊙ go to menu ① press menu button on front panel in watch mode ② it will ask for password ③ input password using by channel select button 1 [1][2][3][4] ④ after input password, press enter to display menu • initial administrator, manager, user password is 1234. • showing password as * • password c...
27 6. Menu 1.Display - video setup for watch mode • every system setup can be changed or maintained 1 at menu (6 kinds setup) • move to menu by using up, down, left & right button • to open detail menu, press [enter] button • press [return] button to go back to previous menu or return to watch mode ...
6. Menu 1-2. Monitor • sequence dwell : set up channel sequence cycle time (1-60 sec). • spot-out dwell : setup spot-out time cycle(1~60 sec.). • de-interlace mode : remove interlacing in high resolution & low frame. * this applies only d1 resolution. (704x480) • alarm pop-up mode: alarm channel wil...
6. Menu 1-4. Spot out 29 • select camera channel for spot out • user can see the selected channel via av monitor.
30 2.Camera - setup camera 2-1. Camera title 6. Menu • covert : setup covert on/off *what’s covert? When covert on, display video is hidden in watch mode, but recording is on. • title : setup camera name by virtual keyboard • control the monitor bright, contrast, color, tint • setup value from 0~100...
31 6. Menu ※ how to use the virtual keyboard • choose character by arrow buttons, and then press [enter] button. • press the button for shift then choose the other characters. Tip 2-3. Ptz setup • ptz address : select ptz camera address • ptz protocol : select protocol of ptz camera • press button a...
32 6. Menu 2-4. Motion sersor • move cursor by direction key and press enter at selected region • choose the partial motion region channel by channel • sensitivity: 1~10 • select all : select entire region • deselect all : cancel region setup • cancel : cancel change setup & exit • save & exit : sav...
33 6. Menu 3. Audio - audio setup • live audio : audio output on/off live audio output from audio in terminal • audio monitoring channel: select channel for audio output 1 nr. 1~4 audio in • network audio tx: choose the audio transmission • network audio rx: choose the audio receive 4. System - basi...
34 6. Menu • time zone: choose the time by gmt standard. ※ how to time setup 1. Setup time zone as your location. 2. Setup the network time server and press the “sync” button. 3. If correct time is not set automatically, setup the date/time manually. 4. If don’t follow instruction as above, you may ...
35 6. Menu 4-2. Network • ip address : input the unit ip address. • gateway : input the ip address of internet-connected router • subnet mask : input the subnet mask ip. • dns server: input 1 st and 2 nd dns server ip addresses. • ddns server: input ddns server ip address • net client port : input n...
36 6. Menu 4-3. Mail these settings allow the dvr to send outgoing e-mail notifications to the list of recipients listed within the dvr • server: setup the outgoing mail server address. • input the server address using the virtual keyboard. • port: mail server port number (default is port 25). • sec...
37 6. Menu 4-4. User management user setup • it consists of 3 user groups as administrator, manager, user. • total 7 users for 3 user groups can be made. • input user id, password. • choose the group. • input the e-mail address. • it can edit user id information. • e-mail notification on/off • input...
38 6. Menu 4-5. System information • f/w version: dvr server firmware version. • h/w version : dvr hardware version. • video signal type: ntsc or pal. • disk capacity: used hdd capacity/ total hdd capacity. • ip address: current ip address of the dvr. • mac address: fixed mac address of the dvr. • f...
39 6. Menu 5. Event/sensor 5-1. Hdd event • drive: hdd connected location • smart alarm: on/off • check interval: hdd checking time 4-6. Control device (tbk-7008/7016 only) • system id : select system id. (1~254) • protocol : select protocol. • baud rate : setup baud rate..
40 6. Menu 5-2. Alarm input 5-3. Alarm output ※ setup each channel when alarm, videoloss, motion are happened. • hdd event: alarm on/off when hdd has the problem. • operation: setup relay connect with alarm sensor. • mode: setup reacted relay as latched/transparent mode. • type: setup relay type n/o...
41 6. Menu 5-4. Buzzer out • buzzer: on/off • duration: buzzer time (5sec~5min or until key-in) • setup each channel when alarm, videoloss, motion are happened. • hdd event: buzzer on/off when hdd event is happened. • keypad : setup key input sound. • remocon: setup remocon input sound. 5-5. E-mail ...
42 6. Menu 6. Disk management • disk overwrite : (on/off) overwrite permission (when hdd is full) on: overwrite hdd, starting with the oldest data first (also known as fifo – first in, first out) off: when hdd is full, recording will be halted and the system buzzer will activate • format : (click st...
43 6. Menu ⊙ go to record menu 1. Recording operations • schedule mode: choose the daily or weekly. • pre-event recording time : setup pre-event recording time. 1 (1~5 sec) • post-event recording time: setup post-event recording time. 1 (1~5 sec).
6. Menu 2. Continuous / motion record schedule 2-1. Parameter 2-2. Schedule • select a block of time from the 0-24hr timeline (you may select multiple blocks). • press enter again to set up the resolution, fps, quality, and audio on each channel. • continuous recording icon • motion recording icon •...
6. Menu 3. Alarm recording schedule 3-1. Parameter 3-2. Schedule • alarm recording icon • select a block of time from the 0-24hr timeline (you may select multiple blocks). • press enter again to set up the resolution, fps, quality, and audio on each channel. • select an area (channel / time of day) ...
6. Menu 4. Panic setup (tbk-7008/7016 only) • to setup each channel, press enter. • setup each channel. (size, fps, quality, audio) • by using panic button of front panel can record urgently as setup. 46.
47 6. Menu ⊙ go to archiving ① ② ③ ⑦ ④ ⑤ ⑥ ① device : indicate cd-rw model and usb memory model automatically. If you use the cd-rw and usb memory (or usb hdd) together, it can choose the cd-rw and usb by up & down button. ② start time : select start backup time. ③ end time : select end backup time....