Box camera instruction manual ver.:1.0, no.:040125a.
1 thank you very much for purchasing our product. Before operating this product, please read this instruction manual carefully to ensure proper use. 1. Safety precautious caution risk of electric shock. Do not open! Caution : to reduce the risk of electrical shock, do not open covers. No user servic...
2 3. Feature camera with sony super had ccd sensor in metal case. Employs digital signal processor (dsp) chip-set for image control. Pixel number: ntsc=380k/ pal=440k (eia=380k/ ccir=440k) for high resolution models, and ntsc=270k/ pal=320k (eia=270k/ ccir=320k) for normal resolution models. High se...
3 5. Name of each part fig. 1 fig. 2.
4 6. Installation & operation please refer to fig. 1 or fig. 2 (p3) and setup guide below: 1. Remove the cap cover from the top of the lens mount. 2. Screw the lens into the lens mount. 3. Connect the video output (11) to the monitor or other video device through a 75 ohms type coaxial cable. 4. Con...
5 10. Auto iris control pin video driver dc driver (direct drive) 1 2 3 4 vdc out iris out n.C. Gnd damp- damp+ drive+ drive- auto iris lens connector.
6 7. Specification according to the camera purchased, select and refer to the appropriate specification below: color camera image device 1/3“ color sony super had 1/3“ color sony hi-res. Super had 1/3“ color sony ultra hi-res. Super had 1/4” color sony super had picture elements ntsc: 510 x 492 pal:...
7 b/w camera image device 1/3” b/w sony super had 1/3” b/w sony hi-res. Super had 1/3” b/w ccd picture elements eia: 510 x 492 ccir: 500 x 582 eia: 768 x 494 ccir: 752 x 582 eia: 510 x 492 ccir: 500 x 582 resolution 420 tvl 510 tvl 600 tvl 710 tvl 400 tvl min. Illumination 0.05 lux/ f1.2 0.02 lux/ f...
