Color dsp ccd camera instruction manual ver.:1.0, no.:040045a.
1 thank you very much for purchasing our product. Before operating this product, please read this instruction manual carefully to ensure proper use. 1. Safety precautious caution risk of electric shock. Do not open! Caution : to reduce the risk of electrical shock, do not open covers. No user servic...
2 3. Features color camera with a sony 1/3“ super had ccd sensor. Employed digital signal processor( dsp )chip-set for image control. Pixel number: ntsc=380k / pal=440k (high resolution) ntsc=270k / pal=320k (normal resolution) high sensitivity, low smear, high anti-blooming, and a high s/n ratio. F...
3 4. Name of each parts.
4 5. Installation & operation please refer to fig. 1 or fig. 2 (p3) and setup guide below: 1. Remove the cap cover from the top of the lens mount. 2. Screw the lens into the lens mount. 3. Connect the video output (9) to the monitor or other video device through a 75 ohms type coaxial cable. 4. Conn...
5 • if the auto iris lens is setup to the dc drive (or direct drive), the switch (5) should be in position with the dc drive. Adjust the vr (3) to the proper level. • if video drive iris lens is used, the switch (5) should be in position with the video dr. • when using manual iris lens, dip s.W swit...
6 6. Auto iris control pin video driver dc driver (direct drive) 1 2 3 4 vdc out iris out n.C. Gnd damp- damp+ drive+ drive- auto iris lens connector 7. Packing 1 camera 1 allen wrench 1 4-pin connector for auto iris lens 1 instruction manual.
7 8. Specification image device 1/3” color sony super had 1/3” color sony ex-view super had 1/3” color sony hi-res. Super had 1/3” color sony hi-res. Ex-view super had picture elements ntsc ： 510 × 482, pal ： 500 × 582 ntsc ： 768 × 494, pal ： 752 × 582 resolution 380 tvl 470 tvl min. Illumination 0....
