TBM MPL020 User Manual - page 4
5
6.4 SLIDESHOW SETUP
SLIDESHOW MODE:
:
:
:Set the slideshow to start automatically.
FOLDER REPEAT:
:
:
:Set all files (picture, music or
movie) in the folder to show only once or
continuously (loop).
INTERVAL TIME:
:
:
:Set the time each photo is
shown to 1, 3, 5, 10, 30 or 60 seconds.
TRANSITION (EFFECT):
:
:
:Set the transition effect
and auto slide with sequential or random playback.
TIME MESSAGE (only for timer function):
:
:
:Set the time message is shown on the
screen.
AUTO START:
:
:
:Enable/ disable auto playing media files on the memory card when the
device is turned on.
6.5 PREFERENCE
OSD LANG: Select the OSD language (ENGLISH, FRENCH, GERMAN, ITALIAN,
JAPANESE, PORTUGUESE, SPANISH and NEDERLANDS).
OSD MESSAGE: Turn the OSD message function on/ off.
RESET: Reset all settings to the original (factory)
settings.
FIRMWARE : New F/W can upgraded from the
memory card.
• EDITION : Show the F/W versions.
• UPDATE : Used to update the F/W.
6
Copy files (music, picture and movie) to the memory card first.
7.1 PLAY PICTURE FILE
Step 1: Press the “SLIDE” button on the remote control from any menu.
Step 2: The preview mode will show all the picture files on the memory card.
Use the “▲
、▼、 ▲ 、 ▼ ” buttons to select the picture file, and press the “ENTER”
button to play the picture file.
Step 3: If the “SLIDESHOW MODE” is disabled, press the “NEXT” button to play the next
picture file, the “PREV” button to play the previous file.
7. USING THE MPL020