Tbs Electronics MOI DVB-S2 Streaming Box Quick Start Manual - page 6
www.tbsdtv.com
6
One of the following client end devices for receiving streaming TV channels
o
PC with Windows or Linux system
o
Android tablet PC
o
Android smartphone
o
iPhone, iPad, iPod
o
Sony Playstation 3 etc.
1.4. Package Includes:
TBS MOI DVB-S2 Streaming Box
RJ45 Network Cable
Power Adapter
Quick Start Guide
RS232 adapter board
2. Hardware Connection
1) Connect the included
power adapter
to MOI
2) Connect
satellite signal cable
to Tuner A or Tuner B.
If you want to connect two satellite signal inputs to both Tuner A and Tuner B, the signal inputs
should be from different LNBs unless you
’re using dual/quad LNB. MOI has dual DVB S2 tuner
,
thus it enables you to receive channels from two separate transponders simultaneously.
3) Connect MOI via the included
RJ45 Network cable
to your router or switch.
4) Connect MOI via
RS232 slot
to the computer. This connection is not a MUST, it is only
recommended for those who want to add or edit the imbedded software on MOI.
3. Software Installation and Configuration (for Windows/ Linux/ Android/ iOS)
MOI box serves as a dual DVB-S2 tuner Linux system backend TV source with
Tvheadend, DVBlast,
mumuDVB, szap, scan
pre-installed.
You can set up Tvheadend by simply entering the IP address
http://192.168.1.188:9981
on your
browser (or if you have changed MOI IP to another IP address, enter the respective IP address with
port 9981).
For watching/recording satellite TV on your client end devices, you can instal
VLC, XBMC,TVHGuide
or other software on your client device, more information for how to use VLC, XBMC,TVHGuide for
streaming can be found on the download section of
tbsdtv.com.