Tbs Electronics TBS3202_b User Manual
2. SIM Card installing
2.1 SIM Card slot
Notes:
Please make sure the phone has been turned off before
you insert or remove the SIM card.
2.2 How to insert the SIM card
PS.:
> TBS GPS watch phone series are compatible with Micro-SIM card
(15*12mm standard).
> TBS GPS watch phone series just support 2G: GSM 850/900/
1800/1900MHz.
3. Reset and Charge
3.1 Reboot and reset the watch phone
> Use a small pointed device to press the mini “Reboot” button to
reboot the watch.
> Guardians send SMS “0#password” to the watch phone to reset
it. If the watch is malfunctioning for any reason, Guardians can
send this SMS command to restore default settings.
3.2 Charge the watch phone
> The watch phone has built-in Lithium Polymer Battery, you can
change it by connecting to power adapter or computer.
> When the watch is charging, the red LED light which the “Hang
up button” is lit. When it is fully charged, the green LED light which
the “Calling button” will be lit.
4. Turn on and Turn off
4.1 Turn on the watch pone
Note:
Please make sure the SIM card have been inserted correctly.
> If the SIM card is installed correctly, user will hear voice prompt
“Entered the standby mode, self-check normal”.
> If the SIM card is installed incorrectly, user will hear voice
prompt “Entered the standby mode, please check the SIM card”.
> When you hear the voice prompt “Self-check normal”, it means
the watch phone is checking GPS signal automatically. If you are
indoors, you will hear voice prompt “It is out of GPS signal, please
go to outdoors”.
4.2 Turn off the watch phone.
> Hold down the “Power Button” to turn off the watch phone.
7. Dial /Answer a phone call
7.1 Answer a phone call
> Press “Speed Dial button 1-3” to answer the call. Or press to
answer the call. (For TBS3202-B only)
> Press “Turn on button” to hang up the call. Or press to hang
up the call. (For TBS3202-B only)
> The watch will answer the phone automatically 10 seconds later
after a call is coming, even though the user does not press any
button to answer the phone.
7.2 Dial a phone call
> In standby state, press corresponding speed dial button to call
the guardian, and you will hear voice prompt as “call out”.
> In default mode, users can call anyone by dial the number in the
keypad(For TBS3202-B only).
> Hold down button of speed dial - 2 to start SOS call. Once user
starts SOS call, the watch phone will call guardians one by one till
someone answers the phone.
8. Working mode setting
8.1 The watch phone supports 4 working modes:
> Mode 1 (Default)
– Positioning acquiring system is active + the
watch can get any incoming and all outgoing calls are allowed by
dialer or speed dial buttons, speaker is active, vibration is active.
> Mode 2 (Positioning only)
– Positioning acquiring system is
active without incoming and outgoing calls, speed dial buttons are
disabled, dialer buttons are disable, speaker is disable, vibration is
disable.
> Mode 3 (Parents only)
– Positioning acquiring system is active +
only guardians are allowed for incoming and outgoing calls, speed
dial buttons are active, dialer buttons are disabled, speaker is
active, vibration is active.
> Mode 4 (Silent mode)
– Positioning acquiring system is active +
only guardians are allowed for incoming and outgoing calls. Speed
dial buttons are active, dialer buttons are disables, speaker is
disable, vibration is active.
8.2 Guardians can change the working mode by sending SMS to
the watch:
> Send “3#password#1” to set up the “Mode 1”.
> Send “3#password#2” to set up the “Mode 2”.
> Send “3#password#3” to set up the “Mode 3”.
> Send “3#password#4” to set up the “Mode 4”.
8.3 If the working mode is changed successfully, guardian’s
phone will receive confirmation SMS “MODE 1/2/3/4 SET, OK”
from the watch phone.
Note:
GPS tracking function, SOS function, Monitoring functions
are always workable in any mode.
9. GPS Position
When the watch phone receives SMS “5#password” from
guardian’s number, it will reply guardian a GPS position SMS with
Google map link, which includes longitude and latitude.
Note:
The watch should be taken to outdoor for GPS signal. If it
can’t receive GPS signal for the position, it will reply the guardian
with location of the previous GPS positioning.
10. Audio Remote Monitor
> If guardians send SMS “6#password” to the watch phone, the
watch will call back guardian’s number automatically to have a
one-way conversation.
> If guardians send SMS “6#password#assigned phone number”
to the watch phone, the watch phone will call the assigned
number automatically to have a one-way conversation.
> If guardians send SMS “11#password” to the watch phone, the
watch phone will call back guardian’s number automatically to
have a two-way conversation.
User Manual
------
TBS GPS Tracker watch phone
For model: TBS3202_b/TBS3203
Edition 1.2
www.tbspc.com
support@tbspc.com