Matrix get started guide v2.0
---2 / 9 --- matrix – get started guide v2.0 overview matrix is a single board mini computer based on arm with a wide range of interface, equipped with a powerful i.Mx6 freescale processor, it can run android, linux, ubuntu and other operating systems, a switch between different operating systems ca...
---3 / 9 --- matrix – get started guide v2.0 specification system-on-a-chip (soc) freescale mcimx6q5eym10ac cpu quad arm cortex-a9 at 1.0ghz gpu vivante gc2000, quad core gpu, quad ipu ram 2gb ddr3 usb 2.0 ports 3x usb 2.0 audio & video 3.5 mm jack hdmi port other interface sata3.0 uart port i/o por...
---4 / 9 --- matrix – get started guide v2.0 interface introduction 1. I/o port 2. 2x usb 2.0 ports 3. Micro sd/ tf card slot 4. Lan port 5. Hdmi port 6. Audio (3.5mm jack) port 7. Led indicator 8. Optical (s/pdif) port 9. Usb 2.0 port 10. Dv 12v (power connector) 11. Reset button 12. Sd card slot 1...
---5 / 9 --- matrix – get started guide v2.0 get started matrix is an open source mini pc based on arm, which can run android, linux, ubuntu and many other operating systems, by default it has matrixtv system preinstalled inside, it’s easy to switch to another system within just a few minutes, by bu...
---6 / 9 --- matrix – get started guide v2.0 02- connect the network cable connect the network cable to the lan slot on matrix. 03- connect keyboard & mouse there are 3 usb2.0 ports on matrix, two of which can be used to connect with a keyboard and a mouse..
---7 / 9 --- matrix – get started guide v2.0 04- power on matrix matrix starts to boot the moment you plug the power supply to the “dc 12v” slot. Now matrix is ready for you to explore more!.
---8 / 9 --- matrix – get started guide v2.0 switch to another operating system matrix runs matrixtv system by default, if you want to switch to another operating system, you need to burn a new os 3 intos the emmc on the board. In order to burn the new os into emmc, you are going to need: 1x pc 1x u...
---9 / 9 --- matrix – get started guide v2.0 how to update matrixtv system through sd card if your matrix runs matrixtv v1.0.0.7 or a later version, system update becomes more convenient now, you no longer have to connect it via mini usb cable to the pc and then flash the new os to emmc, because mat...
