TC Electronic M-ONE Quick Manual - page 3
3
QUICK GUIDE
I/O
RECALL
BYPASS 2
TAP
UTILITY
STORE
EXIT
EFFECTS
PROGRAM
SETUP
CONTROL
ENTER
BYPASS 1
ROUTING
ALGO | EDIT
ALGO | EDIT
ROUTING key
Press the ROUTING key to set
the Engine Routing.
The options are: Dual Send /Ret,
Parallel, Parallel/Serial, Serial,
Stereo, Dual Mono.
I/O SETUP
Basic parameters are set here.
- Input source - Analog/Digital.
- Sample Rate - 44.1/48kHz/DI.
- Bypass Mode - See Bypass
keys 1 and 2.
- Global Output level.
- Input level sensitivity:
Consumer (-10dBu) or
professional (+4 dBu).
- Dither 16, 20 or 24(off).
TAP key
Tap this key to enter global Tap
tempo and to enter the Tap menu.
Subdivision of the tapped tempo
is setup in this menu. The tapped
tempo can be used for Delay
time, Chorus rate etc.
UTILITY
MIDI, SysEx-ID, Routing-lock,
Bypass mode and Pedal function.
STORE key
Selects the Store menu. Presets
can be stored in the User bank
only. Location is selected using
the CONTROL wheel. Operation
is confirmed using ENTER.
CURSOR UP/DOWN
Use the cursors to move around
in the display.
ENTER key
Confirms operations. The ENTER
key LED will indicate when this
key can be used.
EXIT key
Is used to exit a menu or to
disapprove an action.
CONTROL wheel
Is used to change values.
ALGO/EDIT 1+2
Press this key to enter the Edit
display and the Algorithm Change
display of the currently selected
Engine.
BYPASS keys 1 and 2
The Bypass mode is set up in
Utility. There are three different
Bypass modes:
1 0% Mix:
The Input signal is passed
directly to the Output.
2 Fx Input:
Cuts only the Engine Input in
order to let the effect "ring out",
but will still leave the same
amount of dry signal coming
through.
3 Fx Output:
Cuts only the Engine Output in
order to kill the Fx instanta-
neously, but leaves the same
amount of dry signal coming
through.
RECALL key
Selects the Recall menu.
Select a desired preset using the
CONTROL wheel and press the
ENTER key to enter/load the
selected preset.