TC Electronic ROTTWEILER User Manual - (En) Introduction

Page of 10

Download

Print this page

Bookmark us

(EN) Introduction

Röttweiler Distortion goes the extra mile and delivers an unparalleled sound that will inspire you to riff

for days. The all-analog design gives you a unique distortion circuit based on soft clipping – just like

real tube amps – for an extremely authentic response and tone.

Now, you can get that bone-crushing sound through virtually any amp. Röttweiler Distortion is voiced

to burn through any mix. Typically, hi-gain pedals sound great on their own, but once the band starts

playing, they become less convincing. You will not experience that with Röttweiler Distortion!

Whether the ideal is power metal or tight-chugging thrash, Röttweiler will deliver at the flick of a switch.

The ‘Voice’ toggle switch allows for choosing between two midrange voicings, instantly going from

classic hard rock to full-on death metal. Also, the two tone controls, Treble and Bass, let you fine-tune

your guitar tone to whatever your needs and wants might be in a matter of seconds.

www.tcelectronic.com - www.youtube.com/tcelectronic

« ‹ Prev 1 2 3 4 5 6 7 Next › »

Summary of ROTTWEILER

Page 1
User’s manual o u tp u t in pu t distortion true bypass gain bass treble level voice.
Page 2
2 important safety instructions 1 read these instructions. 2 keep these instructions. 3 heed all warnings. 4 follow all instructions. 5 do not use this apparatus near water. 6 clean only with dry cloth. 7 do not block any ventilation openings. Install in accor- dance with the manufacturer’s instruct...
Page 3
3 these limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can radiate radio frequency energy and – if not installed and used in accordance with the instructions – may cause harmful interference to radio ...
Page 4: (En) Introduction
4 (en) introduction röttweiler distortion goes the extra mile and delivers an unparalleled sound that will inspire you to riff for days. The all-analog design gives you a unique distortion circuit based on soft clipping – just like real tube amps – for an extremely authentic response and tone. Now, ...
Page 5
5 1 - effect on/off (true bypass) 2 - 1/4 inch mono jack input 3 - 1/4 inch mono jack output 4 - bass control 5 - treble control 6 - gain control 7 - level control 8 - voice selector 9 - power in (9vdc) o u tp u t in pu t distortion true bypass gain bass treble level voice.
Page 6: Connecting
6 connecting input jack – 1/4 inch mono jack input. If you run the pedal on battery, we recommend removing the input jack to preserve battery power when you don’t play. Output jack – 1/4 inch mono jack output for connecting to another pedal or directly into an amp or mixer. Power in – use a 9 vdc po...
Page 7: The Controls
7 the controls bass & treble bass/treble controls. Add bass for more punch or roll off a bit for a tighter sound on big cabinets. Add treble to cut through a dense mix or reduce to aim for a softer tone. Gain controls the amount of gain. The range goes from medium metal drive to full punchy cutting ...
Page 8
8 changing battery – unscrew the thumb-screw on the back of the pedal and detach the back-plate. Unmount the old battery and attach the new battery to the battery clip making sure the polarity is correct. Then remount the back-plate. To save battery life, remove the input jack when you don’t play. B...
Page 9
9 unique distortion circuit with classic tube-amp characteristics: high headroom, low compression and amazing bottom-end touch sensitive – control tone and distortion level by pick attack and your guitars volume knob two-band active eq with separate bass and treble controls voice switch for vintage ...
Page 10
Tc electronic, sindalsvej 34, dk-8240 risskov info@tcelectronic.Com.