TC Electronic TM7 User Manual - page 16
Installation | Pin Assignment
EN-16
Manual | TouchMonitor TM7/TM9
Pin Assignment (continued)
24 V - 1 A (4-pin locking low voltage connector, Typ Binder 710)
Pin:
Function:
1 - 2
+24 V DC
3 - 4
0 V
note
- An external overcurrent protective device (2 A max.) shall be
installed when using an external 24 V DC power supply!
gP io
(RJ-11 6P6C socket)
External control of functions defined in the Global Keyboard menu.
Pin:
Function:
1
GND
2 - 6
Function acc. to definition in the menu
Pin 2
Pin 1
Pin 3
Pin 4
(External view of the connector)
AES3id In/Out 1 - 4, AES3id In/Out 5 - 8 (unbalanced, BNC-F)
(External view of
the connector)
Pin:
Function:
Pin:
Signal
Ring:
Shield/case
note - The AES3id inputs are permanently terminated with 75 Ohm.
USB-A
2 Full Speed USB 2.0 interfaces for the connection of USB sticks (Licence hand-
ling, presets, updates) and an external mouse or Wacom® tablet
VGA (15-pin Sub-D-F)
Pin:
Function:
1
R
| Video signal
2
G
|
3
B
|
4 - 8
GND
9
+5 V
10 - 11
GND
12
SDA
13
H-sync
14
V-sync
15
SCI
note - The VGA cable shell not exceed 10 to 15 lenght!
LAN
RJ-45 standard network connector (10/100 MBit)
(External view of the connector)
(External view of
the connector)