TC-Helicon MP-76 User Manual - page 9
Using MP-76 with your VoiceLive Touch 2
MP-76 English Manual – 2015-01-20 7
Using MP-76 with your
VoiceLive Touch 2
Make sure your VoiceLive Touch 2 is running
the newest firmware version. Use VoiceSupport
software to update your device’s firmware. You
can download VoiceSupport here:
tc-helicon.com/products/voicesupport/
To enable Mic Control on VoiceLive Touch 2 for
your MP-76:
►
Press SETUP.
►
Navigate to the INPUT tab using the
arrow buttons on the SliderFX bar.
►
Select the INPUT parameter using the top left
button on the Matrix.
►
Change the INPUT TYPE to MP-76 using the
SliderFX bar.
To select what your MP-76 buttons do:
►
Press SETUP.
►
Navigate to the MIC CONTROL tab using the
arrow buttons.
►
Select the UP button parameter using the
Matrix.
►
Use the SliderFX bar to select the “target” for
the UP button.
(“Target” meaning: “What this button is sup-
posed to do”).
Some options have “Momentary” in the title.
“Momentary” means:
“To activate the feature, press and hold the
button.
To deactivate the feature, release the button”.
►
Repeat this process for the other three mic
buttons (Left, Right, Down).
You’re done!