1. DL manuals
  2. TC-Helicon
  3. Music Pedal
  4. VoiceTone C1
  5. User Manual

TC-Helicon VoiceTone C1 User Manual

Summary of VoiceTone C1

  • Page 1

    Voicetone c 1 user’s manual.

  • Page 2

    Important safety instructions 1 read these instructions. 2 keep these instructions. 3 heed all warnings. 4 follow all instructions. 5 do not use this apparatus near water. 6 clean only with dry cloth. 7 do not block any ventilation openings. Install in accor- dance with the manufacturer’s instructio...

  • Page 3

    Frequency energy and – if not installed and used in accordance with the instructions – may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or t...

  • Page 4: (En) Introduction

    Www.Tc-helicon.Com - www.Youtube.Com/tchelicon (en) introduction voicetone c1 offers correction, hardtune and gender effects in an easy-to-use footpedal. This product is ideal for singers who seek ultimate pitch accuracy in live performance and recording. It also produces the infamous “cher” effect ...

  • Page 5

    1 - effect on/off footswitch 2 - instrument thru to amp/pa 3 - instrument ground lift: in=lifted 4 - mic input level control 5 - key selector including chromatic (ch) 6 - attack speed control 7 - gender control 8 - balanced xlr mic input 9 - balanced xlr mono output 10 - power in 11 - usb connector ...

  • Page 6: Connecting

    Connecting mic jack - connect your mic here using a balanced xlr cable. Phantom power is always on. Out jack - connect to your pa mixer, another voicetone pedal or powered speaker. Power in - connect the supplied 12vdc power supply. Optional: usb - connect to a computer running the tc-helicon voices...

  • Page 7: First Setup And Use

    First setup and use 1. Turn down your pa’s master volume. 2. Connect your mic and pa as shown in the diagram first, then plug in the ac adaptor. For live performance, a usb connection to a computer is not required. 3. Set the key to c, attack control to hard and the gender control to the center notc...

  • Page 8: Effect Descriptions

    Effect descriptions key control - setting this control to your song’s accompaniment key is essential for hardtune and pitch correction to be musically useful. While this selector only offers major keys, you are able to select relative minor keys according to the chart following: in the key of c, the...

  • Page 9

    Using multiple voicetone single pedals it is possible (even encouraged!) to use more than one voicetone pedal at a time. You will only need to adjust the mic gain control of the first pedal in the chain. On the rest, mic gain should be set to the minimum (fully left) position. The order of the pedal...

  • Page 10: Faq

    Faq why am i hearing distortion? Likely the mic gain knob is set too high. Ensure that the input led is green most of the time with only brief and rare peaks of red. Can i use the product on an auxiliary send/return? Yes. You will need balanced xlr to trs cables to do so. Ensure that the mic gain kn...

  • Page 11

    (en) technical specifications input mic input impedance: balanced: 2.68 kohm mic input level @ 0 dbfs: -42dbu to +1dbu ein @ max mic gain rg = 150 ohm: -126 dbu mic input snr: >104 db guitar input impedance: 1 mohm guitar input level @ 0 dbfs: -7 dbu to 17 dbu guitar input snr: >115db output output ...