1. DL manuals
  2. TCL
  3. TV
  4. CTR1042
  5. Service Manual

TCL CTR1042 Service Manual

Summary of CTR1042

  • Page 1

    Service service contents page 1. Technical specifications, connections and chassis overview 2 - 3 2. Safety & maintenance instructions, warnings and notes 4 - 5 3. Directions for use 6 - 32 4. Mechanical instructions 33 5. Faultfinding 34 -40 6. Block diagram, i2c overview block diagram 41 2 i c 42-...

  • Page 2

    Index: note: below described specifications are not valid for one product, but for the whole product range. See product survey for specific models. Figures can deviate slightly from the actual situation, due to different set executions. 1. Technical specifications. 2. Connections. 3. Chassis overvie...

  • Page 3

    Colour television chassis: m123a 3 1.3 chassis review 7.1 power supplier 7.2 line deflection 7.3 frame deflection 7.4 tuner if 7.5 mcu, video if and sound if 7.6 btsc (stereo/sap) decode 7.7 video source switching msp panel crt panel main chassis panel side av panel.

  • Page 4

    2. Safety & maintenance instructions, warnings and notes 2.1 safety instructions for repairs 2.2 maintenance instructions safety regulations require that during a repair: --due to the 'hot' parts of this chassis, the set must be connected to the ac power via an isolation transformer. -- safety compo...

  • Page 5

    --- in order to prevent damage to ics and transistors, avoid all high voltage flashovers. In order to prevent damage to the picture tube, use the method shown in fig. 2-1, to discharge the picture tube. Use a high voltage probe and a multi-meter (position vdc). Discharge until the meter reading is 0...

  • Page 6: 3. Directions For Use

    3. Directions for use 3.1 basic cable tv connection dvd input y cb cr in2 out video audio r l - - 75ohm antenna input dvd input y cb cr in2 out video audio r l - - 75ohm antenna input 75 ohm antenna input 75 ohm antenna input cable tv company cable tv company cable box the cable tv signal into your ...

  • Page 7: 3. Directions For Use

    Dvd input y cb cr in2 out video audio r l - - 75ohm antenna input dvd input y cb cr in2 out video audio r l - - 75ohm antenna input 75 ohm antenna input uhf/vhf combiner 75-300 ohm adapter vhfantenna vhfantenna uhfantenna rear of tv or a combination antenna receives normal broadcasting channels (vhf...

  • Page 8: 3. Directions For Use

    Dvd input y cb cr dvd input y cb cr in2 out video audio r l - - 75ohm antenna input dvd input y cb cr in2 out video audio r l - - 75ohm antenna input dvd input y cb cr in2 out video audio r l - - 75ohm antenna input in1 audio video s-video l (mono) r the basic antenna/cable tv to accessory (vcr, dvd...

  • Page 9: 3. Directions For Use

    3. Directions for use 3.4 basic to antenna connection press power to turn on the tv. Press vol. To increase the sound level. Press vol. To lower the sound level. Press ch. Or ch. To select tv channels. Press menu to see the tv s on-screen menu. In the menu, use vol. / and ch. / button to make adjust...

  • Page 10: 3. Directions For Use

    3. Directions for use 3.5 remote control standby button press to turn the tv on or off(standby). You also can turn on the tv by pressing the ch(annel) / buttons on the front of the tv. Sleep button press to select a time period (120 minutes to 10 minutes in 10 minutes decrements) after which the tv ...

  • Page 11: 3. Directions For Use

    3. Directions for use 3.6 language language you can set the tv s on-screen menu to be in english, or spanish. Press menu to see the menu. Press vol+ or vol- to highlight ( feature ). Press ch- to highlight language . P r e s s v o l + o r v o l - t o s e l e c t english or espanol (spanish). Press m...

  • Page 12: 3. Directions For Use

    3. Directions for use 3.7 tv/cable tv (catv) brightness contrast tint blue back noise red. C. Temp 50 50 50 on off normal sharpness 50 color 50 add/erase fine 0 f a v o r i t e l i s t add 2 channel manual up tv tv/catv auto search add/erase fine 0 f a v o r i t e l i s t add 2 channel manual up tv ...

  • Page 13: 3. Directions For Use

    3. Directions for use 3.8 auto search (setting tv channels) you can set your tv to receive local tv channels (from an antenna) or cable tv channels(when you have cable tv service). Then, use auto search to set up channels that are available for you. This makes it easy for you to select only the avai...

  • Page 14: 3. Directions For Use

    3. Directions for use 3.9 manual channel tunning/fine tuning manual channel tuning lets you quickly select the next available channel. For example, if you are looking for a channel between 60 and 70, start the search at channel 60 and go up. Press menu to see the menu. Press ch+ or ch- repeatedly to...

  • Page 15: 3. Directions For Use

    3. Directions for use 3.10 favorite channel setting you can store five channels you prefer into the favorite list and recall these channels easily by press the favorite button on the remote control. You cannot select preset if the tv is set to av1/s- video, av2, or yuv. Press tv/av repeatedly to get...

  • Page 16: 3. Directions For Use

    3. Directions for use 3.11 adding or erasing channels you can add or erase channels from the list in the tv s memory. Press menu to see the menu. Fine 0 f a v o r i t e l i s t tv tv/catv auto search manual up 12 channel press ch+ or ch- repeatedly to highlight add/erase . Press vol+ or vol- to choo...

  • Page 17: 3. Directions For Use

    3. Directions for use 3.12 picture adjustmentt brightness contrast tint blue back noise red. C. Temp 50 50 00 on off normal sharpness 50 color 50 brightness contrast tint blue back noise red. C. Temp 50 50 00 on off normal sharpness 50 to adjust your tv picture, select a channel and follow the steps...

  • Page 18: 3. Directions For Use

    3. Directions for use 3.13 smart picture whether you are watching a movie or a video game, your tv has automatic picture setting matched for your current program. Smartpicture resets your tv s video settings for different types of programs and viewing conditions. Each smartpicture setting is preset ...

  • Page 19: 3. Directions For Use

    3. Directions for use 3.14 colck follow these steps to set your tv s clock. Press menu to see the menu. Press vol+ or vol- to highlight ( timer ). Press ch- to enter submenu. Timer press ch+ or ch- repeatedly to highlight clock . Press vol+ or vol- to enter the current time. Press and hold the vol+ ...

  • Page 20: 3. Directions For Use

    3. Directions for use 3.15 on timer to turn on the tv to a specific channel at a specific time, use the on-timer. Before you begin, set the clock correctly. Details are on page 17. Press menu to see the menu. Press ch- to enter submenu. Timer press ch+ or ch- repeatedly to highlight on time . Press ...

  • Page 21: 3. Directions For Use

    3. Directions for use 3.16 off timer to turn off the tv at a specific time every day, use the off-timer. Before you begin, set the clock correctly. Details are on page 17. Press menu to see the menu. Press ch- to enter submenu. Timer press ch+ or ch- repeatedly to highlight off time . Press vol+ or ...

  • Page 22: 3. Directions For Use

    3. Directions for use 3.17 closed captoins closed captions (cc) lets you read the voice content of tv programs on the tv screen. Designed to help the hearing impaired, on- screen text boxes will show dialog, conversation, and activity during tv programming. Not all tv programs and commercials are br...

  • Page 23: 3. Directions For Use

    3. Directions for use 3.18 sleep-timer have you ever fallen asleep in front of the tv, only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your tv can save you that trouble by turning itself off. Press sleep. The sleep display will appear on the scree...

  • Page 24: 3. Directions For Use

    3. Directions for use 3.19 understanding parental lock parental lock process program content advisories from broadcasters. Parental lock can respond to the c o n t e n t a d v i s o r i e s a n d b l o c k objectionable content (offensively language, violence, sexual situations, etc.) this is a grea...

  • Page 25: 3. Directions For Use

    3. Directions for use 3.20 parental lock secret code over the next few pages, you will learn how to block programs and understand the rating terms for certain broadcasts. First, set a secret code. You cannot change parental l o c k s e t t i n g s w i t h o u t knowing the secret code. If your code ...

  • Page 26: 3. Directions For Use

    3. Directions for use 3.21 blocking programming with movie ratings there are two types of ratings for p. Lock. One is based on movie industry ratings. The other is based on tv industry ratings. Both can be used to censor programming. Let s first look at the mpaa rating options of p. Lock. Blocking a...

  • Page 27: 3. Directions For Use

    3. Directions for use 3.22 blocking programming with tv ratings some program ratings are based on tv industry ratings as described below. Any rating will block higher ratings automatically. To unblock all the ratings, select none. Notes: 1. Blocking tv-y, only tv- y7 is blocked automatically. 2. Blo...

  • Page 28: 3. Directions For Use

    3. Directions for use 3.23 parental lock blocking options after setting your secret code, parental lock offers special blocking options. Press menu to see the menu. Press vol+ or vol- to highlight ( feature ). Press ch- to enter feature submenus. Press m nu repeatedly to remove the menu from the scr...

  • Page 29: 3. Directions For Use

    3. Directions for use 3.24 child lock child lock allows you to lock the buttons on the front of the tv. P.Lock child lock english off c.Capt off language brightness contrast tint blue back noise red. C. Temp 50 50 00 on off normal sharpness 50 color 50 english language p.Lock child lock off c.Capt o...

  • Page 30: 3. Directions For Use

    3. Directions for use 3.25 smart sound when you are watching a movie or video game, your tv has sound settings that match these programming types. You can choose a smart sound setting quickly by p r e s s i n g t h e s m a r t sound button on the remote control. Helpful hints press menu to see the m...

  • Page 31: 3. Directions For Use

    3. Directions for use 3.26 sound adjustment brightness contrast tint blue back noise red. C. Temp 50 50 00 on off normal sharpness 50 color 50 treble balance s m a r t s o u n d 50 00 theater volume bass 50 50 treble balance s m a r t s o u n d 50 00 theater volume bass 50 50 press menu to see the m...

  • Page 32: 3. Directions For Use

    3. Directions for use 3.27 stereo and second audio program multi-channel sound (mts) broadcasts enhance tv viewing by bringing you programs with high fidelity stereo sound. Mts also provides an extra channel called the second audio program (sap), which broadcasters can use to transmit a second langu...

  • Page 33: 4. Mechanical Instruction

    Colour television chassis: m123a dd 1. Remove the complete side i/o assembly after unscrewing the 2 fixation screws [1]. 2. Release the two fixation clamps [2] and lift the board out of the bracket figure 4-2 4. Mechanical instruction index: 1. Rear cover removal 2. Service position main panel 3. Si...

  • Page 34

    Colour television chassis: m123a 34 5. Faultfinding and test point with waveform diagram 5.1 faultfinding fuse blown is the drain of q801 shorted to earth? Yes cheek / replace q801 is d815~d818 ok ? Yes check ic801 and the peripheral components. Replace d815~d818 no no figure 1 fuse blown no raster ...

  • Page 35

    Colour television chassis: m123a 35 5. Faultfinding and test point with waveform diagram 5.1 faultfinding no raster + b voltage ok is the voltage of in 25 of ic201 3.3v is the resistance to earth of pin25 if ic201 ok no yes is the h-out waveform at pin 13 of ic201 ok? Yes check the waveform at stati...

  • Page 36

    Colour television chassis: m123a 36 5. Faultfinding and test point with waveform diagram 5.1 faultfinding yes symptom: raster ok, no picture, no sound, sparse noise dots apply the pointer of multimeter at r x 1 k ¡ , connect one probe to gnd, use another to touch p42 of ic101. Are there interference...

  • Page 37

    Colour television chassis: m123a 37 no yes is it mute at pin 1 of ic601? Yes no sound is the speaker replace the speaker apply the pointer of multimeter at rx1k ¡ connect one probe to gnd, use another to touch p3, p5 of ic601, is there interference noise from the speaker. No check power supply of ic...

  • Page 38

    Colour television chassis: m123a 38 check p25, p49 of ic201 and the relative circuit no picture tv&av haven’t picture check rgb signal check +9v, +200v ok check q501~q503 check r516 ~ r521 etc. No ok replace ic201 tv has picture. Av hasn’t picture. Check the waveform of pin 14 of ic901 no q905 and i...

  • Page 39

    Colour television chassis: m123a 39 symptom: tuning control doesn’t work press stanby key on r/c. Can the tv be turn on and turn off? Does the channel number display on the screen? Yes no start auto- search. Is the bus ok? Yes after auto-search, can the searched program be memorized? Is the voltage ...

  • Page 40

    Colour television chassis: m123a 40 is there any change on the voltage level at p64 of ic201? No check the remote control receiver and transmitter. Yes is the vdd(+5v) at p9 and p55 of ic201 ok? Is there the 8mhz/5vp-p sine wave oscillations at p6 of ic201? Is the voltage at p5 of ic201 ok? Have p5 ...

  • Page 41: Our

    Co l our te l ev i s i on chass i s : m123a 4 1 6 . B l ock d i agram and i 2c 6 . 1 b l ock d i agram.

  • Page 42: 6. Block Diagram And I2C

    Colour television chassis: m123a 42 0 v 5.1v 5.1v 0 v 5.2v 2.2v 2.0v 0 v 5.1v 0 v 0 v 1 v 1.5v 6.0v 4.1v 5.1v 0 v 0 v 2.3v 2.6v 2.3v 0 v 2.3v 0 v 3.4v 2.3v 4.6v 3.5v 8.8v 4.9v 1.8v 4.3v 2.7v 2.1v 2.5v 4.5v 2.2v 4.8v 4.1v 0 v 0 v 0 v 4.4v 4.8v 1.8v 1.8v 2.5v 0 v 8.8v 2.6v 2.7v 2.5v 0 v 0 v 5.1v 5.1v ...

  • Page 43: 6. Block Diagram And I2C

    Colour television chassis: m123a 43 6. Block diagram and i2c 6.2 i2c 0 v 0 v 61.5 v 0 v 0 v 5 v 4. 5 v 0 v 0 v 0 v 0 v 0 v 0 v 0 v 0 v 0~9 v 0~9 v 0~9 v 13.2 v 4. 5 v 4. 5 v 4. 5 v 0 v 9 v.

  • Page 44: Electrical Diagrams

    Colour television chassis: m123a 44 7. Electrical diagrams 7.1 power supplier 7. Electrical diagrams a 7.2 line deflection wf 1 wf 2 wf 3.

  • Page 45: Electrical Diagrams

    Colour television chassis: m123a 45 7. Electrical diagrams 7.3 frame deflection 7. Electrical diagrams 7.4 tuner if . Wf 4 wf 5 wf 6.

  • Page 46: Electrical Diagrams

    Colour television chassis: m123a 46 7. Electrical diagrams 7.5 mcu,video if and sound if wf 7 wf 8 wf 9 wf 10 wf 11.

  • Page 47: Electrical Diagrams

    Colour television chassis: m123a 47 7. Electrical diagrams 7.6 vbtsc (stereo/sap) decode 7. Electrical diagrams 7.7 video source switching.

  • Page 48: Electrical Diagrams

    Colour television chassis: m123a 48 7. Electrical diagrams 7.8 side av 7. Electrical diagrams 7.9 audio amplifier.

  • Page 49: Electrical Diagrams

    Colour television chassis: m123a 49 7. Electrical diagrams 7.10 crt panel.

  • Page 50: Wave Shape

    Colour television chassis: m123a 50 7 . 11 faultfinding and test point with waveform diagram wave shape no . Wave shape freq. Vpp period hz wf 1 15.74 khz 64 us 2.77 v wf 3 15.74 khz 64 us 925 v wf 2 15.74 khz 64 us 10.88 v wf 4 wf 5 wf 6 60 khz 16.7 ms 135.7 mv 60 khz 16.7 ms 2.95 v 60 khz 16.7 ms ...

  • Page 51: 7.11

    Colour television chassis: m123a 51 7.11 . Faultfinding and test point with waveform diagram wave shape no . Wave shape freq. Vpp period wf 7 hz 15.74 khz 64 us 345 mv wf 8 15.74 khz wf 9 15.74 khz wf 10 60 khz 16.7 ms 15.74 khz 93.2 v 64 us 64 us 319 mv 314 mv 174 mv 64 us wf 11.

  • Page 52: 8. Pcb

    Colour television chassis: m123a 52 8. Pcb 8.1 main pcb.

  • Page 53: 8. Pcb

    Colour television chassis: m123a 53 8. Pcb 8.2 crt pcb.

  • Page 54: 8. Pcb

    Colour television chassis: m123a 54 8. Pcb 8.3 mpx pcb.

  • Page 55: 8. Pcb

    Colour television chassis: m123a 55 8. Pcb 8.4 side av pcb.

  • Page 56

    1. Flowchart of alignment procedure 2 adjustment of b+ voltage 1) apply 120vac(5v) to mains power input, and philips standard testing pattern to rf input. 2) adjust vr830 in standard mode until voltage at tp2 (b+) is 106v 0.5v. 3. Rf agc adjustment observe monitor the collector waveform of q101 with...

  • Page 57

    Colour television chassis: m123a 57 3)alignment of warm colour temperature change color temperature to warm status use a colour analyzer to measure the black side of the screen. By changing the value of rc-w, gc-w and bc-w, set the reading of the colour analyzer to x=296, y=294. Use a colour analyze...

  • Page 58

    Colour television chassis: m123a 58 factory settings d-mode: enter d-mode by pressing d-mode on/off key, and then you can enter the d-mode. S-mode: enter s-mode by pressing volume down key on the unit until the volume decrease to minimum level, then press the display key on the remote handset (don't...

  • Page 59

    Colour television chassis: m123a 59 menu 4 (remote key: 4) item remark cntx maximum contrast cntn minimum contrast brtx maximum brightness brtn minimum brightness colx maximum color coln minimum color tntx maximum tint level tntn minimum tint level menu 5(remote key: 5) item remark brtc 50% brightne...

  • Page 60

    Colour television chassis: m123a 60 bit 3 / bit 4 / bit 5 tv msp avl: 1: yes bit 6 av msp avl 1:yes bit 7 mono+sap 1 yes 0 no opt bit 0 when blue background off (mute pin of cpu): 0: audio mute on 1: audio mute off bit 1 when blue background off (external mute pin of cpu): 0: audio mute on 1: audio ...

  • Page 61

    Colour television chassis: m123a 61 menu 9(remote key:9) item remark v01 volume 1 v25 volume 25 v50 volume 50 v100 volume 100 volmax max volume under hotel mode curtcen center of the curtain volx output gain of pin28 of tmpa8823 or msp34x5 pwtm when use pwm to mute and no sound when changing channel...

  • Page 62

    Colour television chassis: m123a 62 mdoe8 bit 0 america v-chip standard 1 yes 0 no bit 1 canadian v-chip 1 yes 0 no bit 2 unrated 1 yes 0 no bit 3 no rating 1 yes 0 no bit 4 ~bit 7 time setting for curtain when turn on the set mdoe9 bit 0 ~bit 2 n/a bit 3 s-video ,0:parallel to av1 1: parallel to av...

  • Page 63

    Colour television chassis: m123a 63 menu 14(remote key: sleep) item remark hafc bit 1 ~ 0 afc gain (tv mode) [1ch, bit 5 ~ 4] bit 3 ~ 2 afc gain (av mode) [1ch, bit 5 ~ 4] agcc nois ontm v-mute timing when power on (01h = 16ms) nshp decreased level of sharpness when noise reduction is on pvlvl x-ray...

  • Page 64

    Colour television chassis: m123a 64 menu 19 (remote key: picture) item remark m-col mild colour m-bri mild brightess m-con mild contrast m-shp mild sharpness menu 20: no shortcut key item remark seg_point1 highest frequency of vhfl seg_point2 highest frequency of vhfh data_vl vhfl bandswitch bb data...

  • Page 65

    Colour television chassis: m123a 65 10. Circuit description (1) tuner the function of the tuner is to select the channel to be received and suppress the interference, to amplify the high frequency signal, to improve the receiving sensitivity and snr, to generate pif signal through frequency conversi...

  • Page 66

    Colour television chassis: m123a 66 11. List of abbreviations 2cs 2 carrier (or channel) stereo aci automatic channel installation: algorithm that installs tv sets directly from cable network by means of a predefined txt page adc analogue to digital converter afc automatic frequency control: control...

  • Page 67

    Colour television chassis: m123a 67 fm frequency modulation ha horizontal acquisition: horizontal sync pulse coming out of the hip circuit description hfb horizontal flyback pulse: horizontal sync pulse from large signal deflection hp headphone hue colour phase control for ntsc (not the same as 'tin...

  • Page 68

    Colour television chassis: m123a 68 rc remote control handset rc5 remote control system 5, signal from the remote control receiver rgb red green blue rom read only memory sam service alignment mode sap second audio program sc sandcastle: pulse derived from sync signals s/c short circuit scavem scan ...

  • Page 69: 12. Part List

    Item no. Description quantity designator remarks 06-0f3046-b004x 1 11-0bc337-0bx transistor (npn) bc337-40 1 q1501 13-00as12-13b ic as1213b 1 ic1501 14-ire05b-xx0 ir emitting diode tsal6200 1 d1501 18-cb0221-jnx res. C.F. 220 ohm 1/6w +/-5% 1 r1503 18-cb0229-jnx res. C.F. 2.2 ohm 1/6w +/-5% 1 r1501 ...

  • Page 70: 12. Part List

    Item no. Description quantity designator remarks 59-130460-00x rubber pad (25mmx7mm) 2 for front cab.(footing) 59-312160-000 speaker rubber cushion 8 mtg spk 62-216340-0ua holder power cord hips-kingfa 113(vo) 1 62-377180-0ha conector 1 63-b40150-ab4 s/t screw b 4 x 15 ab 20 mtg crt bkt & front cab....

  • Page 71: 12. Part List

    Item no. Description quantity designator remarks 10-79c6v2-dbx diode zener 6v2 1/2w 5% 1 d404 11-a124es-0bx transistor pdta124es (pnp) 1 q005 11-c124es-0bx transistor pdtc124es (npn) 1 q604 11-c124es-0bx transistor pdtc124es (npn) 1 q001 11-c124es-0bx transistor pdtc124es (npn) 1 q004 11-c124es-0bx ...

  • Page 72: 12. Part List

    Item no. Description quantity designator remarks 18-cb0102-jnx res. C.F. 1k ohm 1/6w +/-5% 1 r051 18-cb0102-jnx res. C.F. 1k ohm 1/6w +/-5% 1 r116 18-cb0102-jnx res. C.F. 1k ohm 1/6w +/-5% 1 r234 18-cb0102-jnx res. C.F. 1k ohm 1/6w +/-5% 1 r415 18-cb0102-jnx res. C.F. 1k ohm 1/6w +/-5% 1 r924 18-cb0...

  • Page 73: 12. Part List

    Item no. Description quantity designator remarks 18-cb0224-jnx res. C.F. 220k ohm 1/6w +/-5% 1 r206 18-cb0271-jnx res. C.F. 270 ohm 1/6w +/-5% 1 r217 18-cb0271-jnx res. C.F. 270 ohm 1/6w +/-5% 1 r233 18-cb0272-jnx res. C.F. 2.7k ohm 1/6w +/-5% 1 r022 18-cb0303-jnx res. C.F. 30k ohm 1/6w +/-5% 1 r205...

  • Page 74: 12. Part List

    Item no. Description quantity designator remarks 18-ff0103-jgx res. M.O. 10k ohm 1w +/-5% 1 r410 18-ff0122-jgx res. M.O. 1.2k ohm 1w +/-5% 1 r411 18-ff0123-jgx res. M.O. 12k ohm 1w +/-5% 1 r408 18-ff0129-jgx res. M.O. 1.2 ohm 1w +/-5% 1 r304 18-ff0221-jgx res. M.O. 220 ohm 1w +/-5% 1 r336 18-ef0229-...

  • Page 75: 12. Part List

    Item no. Description quantity designator remarks 25-bfb109-m1x cap. Elec 1 uf 50v +/-20% 1 c214 25-bfb478-m1x cap. Elec 0.47 uf 50v +/-20% 1 c218 25-bfb478-m1x cap. Elec 0.47 uf 50v +/-20% 1 c236 25-bfb479-m1x cap. Elec 4.7 uf 50v +/-20% 1 c304 25-bfb479-m1x cap. Elec 4.7 uf 50v +/-20% 1 c216 25-bfb...

  • Page 76: 12. Part List

    Item no. Description quantity designator remarks 26-ebp103-zfx cap. Cer 0.01uf 50v +80/-20% f 1 c239 26-ebp103-zfx cap. Cer 0.01uf 50v +80/-20% f 1 c020 26-ebp103-zfx cap. Cer 0.01uf 50v +80/-20% f 1 c017 26-ebp103-zfx cap. Cer 0.01uf 50v +80/-20% f 1 c221 26-ebp103-zfx cap. Cer 0.01uf 50v +80/-20% ...

  • Page 77: 12. Part List

    Item no. Description quantity designator remarks 41-wj0050-b00 wire bare jumper 5mm 1 l101 41-wj0060-b00 wire bare jumper 6mm 1 j001 41-wj0060-b00 wire bare jumper 6mm 1 j009a 41-wj0060-b00 wire bare jumper 6mm 1 j015 41-wj0060-b00 wire bare jumper 6mm 1 j101 41-wj0060-b00 wire bare jumper 6mm 1 j20...

  • Page 78: 12. Part List

    Item no. Description quantity designator remarks 41-wj0095-b00 wire bare jumper 9.5mm 1 j231 41-wj0100-b00 wire bare jumper 10mm 1 j002 41-wj0100-b00 wire bare jumper 10mm 1 j002a 41-wj0100-b00 wire bare jumper 10mm 1 j003 41-wj0100-b00 wire bare jumper 10mm 1 j102 41-wj0100-b00 wire bare jumper 10m...

  • Page 79: 12. Part List

    Item no. Description quantity designator remarks 48-tac002-xx0 tact switch 1 s002 48-tac002-xx0 tact switch 1 s003 48-tac002-xx0 tact switch 1 s004 48-tac002-xx0 tact switch 1 s005 48-tac002-xx0 tact switch 1 s006 48-tac002-xx0 tact switch 1 s008a 62-227680-0ua bracket abs-kingfa 606 (uo) 1 62-31043...

  • Page 80: 12. Part List

    Item no. Description quantity designator remarks 27-pbc152-j0x cap. P.E 0.0015uf 63v +/-5% 1 c607 27-pbc152-j0x cap. P.E 0.0015uf 63v +/-5% 1 c608 11-c124es-0bx transistor pdtc124es (npn) 1 q006 25-bcb100-m1x cap. Elec 10 uf 16v +/-20% 1 c901 25-bcb100-m1x cap. Elec 10 uf 16v +/-20% 1 c902 41-wj0075...

  • Page 81: 12. Part List

    Item no. Description quantity designator remarks 41-wj0085-b00 wire bare jumper 8.5mm 1 j920 41-wj0090-b00 wire bare jumper 9mm 1 j904 41-wj0200-b00 wire bare jumper 20mm 1 j233 41-wj0080-b00 wire bare jumper 8 mm 1 j903 41-wj0075-b00 wire bare jumper 7.5mm 1 j022 41-wj0100-b00 wire bare jumper 10mm...

  • Page 82: 12. Part List

    Item no. Description quantity designator remarks 10-0rl255-ebx diode rl255 (power rectifier) 1 d816 10-0rl255-ebx diode rl255 (power rectifier) 1 d817 10-0rl255-ebx diode rl255 (power rectifier) 1 d818 10-0ru3yx-f0x diode ru3yx (fast rectifier) 1 d830 10-0tru3c-f0x diode tru3c (fast recovery) 1 d831...

  • Page 83: 12. Part List

    Item no. Description quantity designator remarks 18-rg0228-jhx res. Wire round 0.22 ohm 2w +/-5% 1 r810 20-tr103h-5cx trimmer b10k horiz type 1 vr830 22-ntc479-xx0 ntc 4.7 ohm +/-18% ntc4.7d2-14 1 rt802 25-343260-m1x car. Elec 1 c832 25-bca102-m1x cap. Elec 1000 uf 16v +/-20% 1 c849 25-bcb100-m1x ca...

  • Page 84: 12. Part List

    Item no. Description quantity designator remarks 41-wj0080-b00 wire bare jumper 8 mm 1 j835 41-wj0080-b00 wire bare jumper 8 mm 1 j836 41-wj0085-b00 wire bare jumper 8.5mm 1 j812 41-wj0090-b00 wire bare jumper 9mm 1 j805 41-wj0100-b00 wire bare jumper 10mm 1 j820 41-wj0100-b00 wire bare jumper 10mm ...

  • Page 85: 12. Part List

    Item no. Description quantity designator remarks 66-382330-0b7 rivet 2.0x3.7x3.5 2 for p801 67-h35984-5a0 heat sink 1 for q801 71-dyp000-tz1 heat sink label 1 stick on heat sink 90-209770-sr1 silicone grease g-746 0 22-ptc200-xx1 ptc 20 ohm +/-20% 1 rt801 41-wj0175-b00 wire bare jumper 17.5mm 1 j807...

  • Page 86: 12. Part List

    Item no. Description quantity designator remarks 18-dd0391-fnx res. M.F. 390 ohm 1/4w +/-1% 1 r254 18-ee0109-jnx res. Fus. 1 ohm 1/2w +/-5% 1 r407 08-2170sg-msp 1 11-sc1815-ybx transistor 2sc1815y 1 q1001 11-sc1815-ybx transistor 2sc1815y 1 q1003 11-sc1815-ybx transistor 2sc1815y 1 q1005 11-sc1815-y...

  • Page 87: 12. Part List

    Item no. Description quantity designator remarks 26-abc152-kbx cap. Cer 1500 pf 50v +/-10% b 1 c1012 26-abc339-czx cap. Cer 3.3 pf 50v +/-0.25 sl 1 c1001 26-abc339-czx cap. Cer 3.3 pf 50v +/-0.25 sl 1 c1002 26-ebp103-zfx cap. Cer 0.01uf 50v +80/-20% f 1 c1031 26-ebp103-zfx cap. Cer 0.01uf 50v +80/-2...

  • Page 88: 12. Part List

    Item no. Description quantity designator remarks 67-257870-2t0 bracket if bd 1 for msp bd to m.Bd 08-2170sg-cry ass'y- crt bd 1 10-1n4148-abx diode 1n4148 (switching) 1 d502 10-1n4148-abx diode 1n4148 (switching) 1 d501 11-sa1015-ybx transistor 2sa1015y 1 q510 11-sc2482-0bx transistor 2sc2482 1 q501...

  • Page 89: Item No.

    Item no. Description quantity designator remarks 35-139730-00x ferr. Bead bf60 1 l506 (for c514) 40-02135s-crd p.C.B. Crt bd 1 41-wj0050-b00 wire bare jumper 5mm 1 from q505 (b) to q505 (e) 41-wj0050-b00 wire bare jumper 5mm 1 from q507 (b) to q507 (e) 41-wj0050-b00 wire bare jumper 5mm 1 from q509 ...