TCS SKYLINE:TEN BASIC Instruction Manual - page 19
19
EN
USER SETTINGS
Make all system settings in the menu
User settings
.
1.
Tap on
Menu
.
2.
Select
Settings
and tap on
User settings
.
3.
Press
Home
or
Back
, to exit the menu.
User settings
Settings System
Network settings
The device is equipped with a LAN and WLAN
interface. The following applications can be exe-
cuted with it:
• Weather-App
• Internet browser
• Calender
The configuration of the interface has to
be executed only by a qualified electrician.
Language
1.
Tap the drop-down menu
Language
.
2.
Select your language.
Date
1.
Tap on the symbol
Date
.
2.
Change the date and confirm with
Finish
.
Ring tone volume
In factory setting, the ring tone volume is set at
level 5.
1.
Move the slide control within the levels 1 to 8,
to change the ring tone volume. The current
ring tone sounds in the selected volume.
Standby mode
In factory setting the scrren is deactivated after
60 sec.
1.
Move the slide control within the gradation 20
to 120 sec, to change the time setting.
Image buffer function
In case of a door call an image is stored auto-
matically. The image can be taken with an adjus-
table delay time. In factory setting the delay time
is set to 5 sec.
1.
Tap on the symbol
Image buffer function
, to
de-/activate the function.
2.
Move the slide control within the gradation 5
to 30 sec, to adjust the delay time.
Key tones
1.
Tap on the symbol
Key tones
, to de-/activate
the key tones.