Summary of TDSESOTH05
Page 1
- 1 - td single ear stereo headset part #: tdsesoth05.
Page 2: 1. Notice Before Using
- 2 - 1. Notice before using thank you for purchasing the td electronics bluetooth® headset (tdsesoth05). Please read this user's manual completely before you use the headset. The tdsesoth05 has been developed using bluetooth® wireless technology and is capable of connecting with bluetooth® devices ...
Page 3: 2. Package Contents List
- 3 - 2. Package contents list please inspect this package and refer to the package contents list below to verify all items were included in this package: a. Tdsesoth05 headset.....................................................1 b. Ac wall charger......................................................
Page 4: Overview
- 4 - 3. Tdsesoth05 bluetooth® headset overview.
Page 5: 4. Battery Information
- 5 - 4. Battery information.
Page 6: 5. Charging The Battery
- 6 - the device is equipped with an integrated lithium-polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging-discharging...
Page 7
- 7 - the tdsesoth05 is operated with a rechargeable battery. Charge the battery completely before its first use. Read the section "battery information" before starting the charging process. 1) connect the charger to the correct outlet. 2) when the charger is connected to the headset, the red indica...
Page 8
- 8 - bluetooth® devices, usage settings, usage styles, and environments. When the battery power is low, the headset will remind you by a "beep" tone every 20 seconds, and the red indicator light starts to flash. - for using the tdsesoth05 with iphone or blackberry, an additional battery meter featu...
Page 9
- 9 - before you use your headset the first time, you must pair the unit with a bluetooth® enabled mobile phone. Pairing is a one-time process and required only for the first connection with the cell phone the tdsesoth05 can be paired with up to eight cell phones and be connected simultaneously with...
Page 10
- 10 - cell phone). - from the list of devices found, select the "tdsesoth05". - if required, enter the pin code "0000" and confirm the entry. If the pairing process was successful, you will hear a signal tone and the indicator lights blue for 3 seconds. (note: the pin code is preprogrammed and cann...
Page 11
- 11 - 7. Multi-connection function the multi-connection function allows for the simultaneous use of the tdsesoth05 with two cell phones. This is an advantage for users with a personal and a business cell phone. Establishing a connection with two cell phones there are several options of connecting t...
Page 12
- 12 - recently connected cell phone. Then it connects itself with the next most recently connected one. - establishing a connection via the cell phone if the cell phone is not one of the two most recently connected cell phones with the tdsesoth05, you have to establish the connection via the blueto...
Page 13: Turning On Your Headset
- 13 - differs for the first and the second device. The other functions are executed the same way using the tdsesoth05 as a connection with only one cell phone. 8. Turning headset on /off turning on your headset while the headset is turned off, press and hold on/off for 3 seconds until you hear a to...
Page 14: 9. Wearing Your Headset
- 14 - at any working state after the headset is powered on, press and hold on/off for 5 seconds. You will hear a tone from high to low, and the red indicator light will be solid for 2 seconds. The headset has now powered off. Note: to conserve power, if the headset is not connected to a device for ...
Page 15: 10. Using The Tdsesoth05
- 15 - 10. Using the tdsesoth05 making a call - using phone's keypad in standby mode, dial the number on your phone's keypad to make a call. - use voice-dialing in standby mode, press the on/off 3-4 seconds, you will hear a short tone from the headset, and the phone will prompt you to say the voice ...
Page 16: Answering A Call
- 16 - this voice dialing function, and voice tags have been set up on your mobile phone prior to attempting this. Refer to your mobile phone's user guide or contact your service provider. Note: the voice dialing is available only for the first device if two cell phones are connected. - last number ...
Page 17: Reject An Incoming Call
- 17 - reject an incoming call when you receive an incoming call, press and hold on/off button for 3 seconds to reject the incoming call. Transferring a call while a call is in progress, press and hold volume (+) for 3 seconds. The call will be transferred from your phone to your headset. Repeating ...
Page 18
- 18 - press on/off shortly. This will accept the waiting call and end current calling. - if there is an incoming call while a call is in progress, press and hold on/off for 3 seconds to accept the incoming call and place the current call on hold. - while a call is on hold and you are engaged in an ...
Page 19: Volume Control
- 19 - volume control while on a call, you can adjust the volume by pressing the volume(+) and volume(-)button or you can adjust the volume directly from your phone. Mute while a call is in progress press and hold volume(-) button, for 2s, you will hear a tone from low to high. The headset's mic is ...
Page 20: 11. Reset The Tdsesoth05
- 20 - 11. Reset the tdsesoth05 the tdsesoth05 can be paired with up to eight cell phones. You can delete the paring list and reset the headset to the factory settings by doing the following: – the headset must be turned on and not be connected to any cell phone or device. – press and hold the on/of...
Page 21
- 21 - do not drop the device from high places. 3) keep device away from humidity, water and any other liquid. If the device is exposed to water, moisture and other liquids do not operate it to avoid any electrical shock, explosion and damage to the device or yourself. 4) do not place or keep this d...
Page 22: 13. Fcc & Ic Statement
- 22 - 9) unplug this device when unused for long periods of time or during lightening storms. 10) the battery used in this device may present a risk of fire or chemical burn if mistreated. 13. Fcc & ic statement operation is subject to the following two conditions: (1) this device may not cause har...
Page 23
- 23 - 14. Ec declaration of conformity operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Note: the manufacturer is not responsibl...
Page 24: Warranty
- 24 - within the eu this product is intended to be used in austria, belgium, denmark, finland, france, germany, greece, ireland, italy, luxembourg, the netherlands, portugal, spain, sweden, and united kingdom and within efta in iceland, norway and switzerland. Warranty this tdsesoth05 is under warr...
Page 25
- 25 - of delivery of product to purchaser, f.O.B. Point of origin replace any defective parts in respect to the product or replace the product with new or like new product at manufacturers option. In the event of a defect, return the product in tact to the manufacturer (shipping to manufacturer wil...
Page 26
- 26 - general provisions: this warranty is given in lieu of all other express warranties, implied warranties, including without limitation, implied warranties or merchantability and fitness for a particular purpose, are limited to the duration of this limited warranty, in no event shall the manufac...
Page 27
- 27 -.