1. DL manuals
  2. TDK
  3. Media Converter
  4. F280 Series
  5. Application Manual

TDK F280 Series Application Manual

Manual is about: Module on Board DC/DC converters, Point of Load converters and AC/DC front end converters

Summary of F280 Series

  • Page 1

    A p p l i c at i o n g u i d e.

  • Page 2

    Innovating reliable power dpa solutions 2 point of load converters 3 intermediate bus converters 5 dc/dc converters 7 ac/dc front ends 15 content about tdk-lambda tdk-lambda corporation is one of the world’s largest manufacturers of standard and configurable power supplies, dc-dc converters and a re...

  • Page 3

    2 dpa solutions – typical architectures the distributed power architecture takes grid ac supply, isolates and converts into a regulated distribution bus voltage, and then into individual high performance regulated voltages suitable for powering specific application loads. Tdk-lambda have the complet...

  • Page 4

    3 dc / dc converters, point of load converters – non - isolated, regulated output input voltage range 2.4 to 5.5v input voltage range 4.5 to 14v tdk-lambda’s range of industry standard footprint point of load converters are compatible with all com- monly used bus voltages and architectures from 3.3 ...

  • Page 5

    4 iax/ibx, 1st generation industry standard line up the first generation of pol converters with the choice of smt or sip packages offer higher levels of output current under given thermal conditions, than many competitor parts allowing existing user products to be upgraded to more power hungry loads...

  • Page 6

    5 a series of products that offer a fully, tightly regulated output for powering 8.3, 9.6 or 12v intermediate bus architectures, overcoming shortcomings when using unregulated converters and allowing full telecom input voltage range operation, without compromise. Quarter brick the addition of the iq...

  • Page 7

    6 full brick targeted at very power hungry intermediate bus converter applications, the ifb offers extremely high levels of useable output power with low airflow and high operating tempera- tures. With non essential features removed, along with simplified droop load current share option offered exte...

  • Page 8

    7 pico brick providing full output power in high temperature environment and higher voltage outputs from a very low profile the pico - brick is well suited to a very broad range of information and communication technology applications including lan/wan, servers and storage, radio, rf amplifiers and ...

  • Page 9

    8 sixteenth brick the well established 1/16b family provides a broad series of fully featured products, compatible with conventional and contact cooling techniques, providing full rated power at high ambient temperature and low airflow, across the wide range of output voltages available. • 1500v bas...

  • Page 10

    9 eighth-brick tdk-lambda’s hugely successful family of eighth brick converters with the broadest range of output voltages available has recently been augmented by the addition of the new wide input voltage products, extending the scope of applications to include ‘remotely powered’ rf devices common...

  • Page 11

    10 quarter-brick covering from 1.2v to 28v and up to 300w, this is possibly the broadest range of quarter bricks available. Many available with 48v and 24v input versions, with high current and true useable power ratings the user has a choice of cooling strategies making the range of user applicatio...

  • Page 12

    11 half-brick tdk-l’s half brick line up offers solutions to a huge range of load demands by covering the output voltage range from 1 v to 53v enabling power hungry low voltage silicon or ‘high voltage’ gan rf devices, poe circuits and almost everything in – between. With baseplate options and low c...

  • Page 13

    12 three quarter brick this family of dual output converters provides two regu- lated output voltages. With sequenced start – up and optimised low ripple and noise, these converters are ideal for sensitive applications such as xdsl cards requiring power for both data processing and ‘line driver’ sil...

  • Page 14

    13 full brick this range of full brick devices with very high output power capability, choice of 48v or 24v input and a range of output voltages is ideal across a broad range of applications. With an auxiliary rail available and active current share, coupled with a dc good indication, these products...

  • Page 15

    14 full brick a series of products with an input range of 200 – 400v dc that provide conversion to fully, tightly regulated low voltage output for powering a variety of loads. Typical applications include ‘dc power distribution’ or ‘dc energy distribution’ systems for the emerging higher voltage dc ...

  • Page 16

    15 pfe series, simple function this range of ‘front end’ converters can be used to create quick to market, low profile single output psu directly power user loads, or combined with any suitable dc-dc converter to facilitate a multi output ‘custom’ psu, complete with pcf, harmonic compliance, and mee...

  • Page 17

    16 pf series the pf series of ac-dc front end converters provide a regulated high voltage dc output to power the tdk-l pf and paf families of dc-dc converters, allowing the user to create a full ‘custom’ psu, from standard parts, featuring wide input ac-dc operating range and power factor / harmonic...

  • Page 18

    Tdk innoveta inc. Corporate headquarters 3320 matrix drive suite 100 richardson, texas 75082 phone: +1 214 239-3100 toll free usa only: (877) 498-0099 fax: +1 214 239-3102 e-mail: support@tdkinnoveta.Com www.Tdkinnoveta.Com tdk corporation of america 475 half day road, lincolnshire, il 60069-2934 ph...