Teac BTS500 User Manual - page 6
3
6. During playback, press the PREVIOUS button once to go back the beginning of the
current track, press the PREVIOUS button twice continuously to skip to the previous
track.
7. During playback, press the NEXT button on the unit to skip to the next track.
8. Press and hold the PREVIOUS/NEXT button on the unit to search through the current
track forward or backward. Release the PREVIOUS/NEXT button to resume normal play.
Note:
y
Pairing mode is canceled (LED indicator green) about 1.5 minutes
y
The above are generic steps to pair a BLUETOOTH device, for more specific instructions
on BLUETOOTH connectivity for your device, please consult your manufacturer’s
manual.
y
Once the unit enters to the BLUETOOTH mode, it will connect to the last paired external
BLUETOOTH device automatically.
RE-CONNECT TO THE BLUETOOTH AUDIO SOURCE DEVICE
If the device is already paired with the BTS500, but became unconnected even with both
Bluetooth devices turned on. You can re-connect them by following steps:
1. Press the BT button to re-link the audio source device. The Bluetooth indicator will blink
for about 1.5 minutes for connecting.
2. Select BTS500 on the audio source device for connecting. Bluetooth indicator will turn to
solid blue if the BTS500 and the device have been re-connected successfully.
AUX IN
Follow below steps to connect the unit to another audio device like MP3 player and the like:
1. Connect the Audio Out of an audio device to AUX IN jack with audio cable.
2. Press the POWER button to turn the unit on.
3. Press the AUX IN button to switch the unit to AUX mode.
4. Power on the audio device and begin playback.
SPECIFICATIONS
Power supply: Input DC 18V 2A (external AC/DC adapter)
Power consumption: 35W
Dimensions: 212 x 212 x 222 mm