Teac DV-516E Installation Manual

TEAC DVD-ROM Installation Guide

—

1—

The TEAC DVD-ROM drive is designed for use in IBM PC or compatible 

computers. It features a 5.25-inch standard chassis and a powered tray for convenient 

disc loading.

The TEAC DVD-ROM drive can read or play DVD and CD discs in a variety of 

formats, including DVD-ROM, DVD-video, DVD-R, DVD-RW, DVD+RW, CD-

ROM, CD audio, CD-R, CD-RW, Video CD and more.

DVD discs supported have a playback capacity of 4.7GB to 17GB.

headphone jack:

 You can connect headphones or external speakers (that use a 

3.5 mm stereo mini-plug) to this jack to listen to audio from a DVD or CD being 

played in your TEAC DVD-ROM drive. For external speakers, connect a stereo 

adapter to split the output into separate cables for the left and right channels. 

Such adapters convert a male stereo mini-jack to two female phono jacks.

emergency eject mechanism:

 If the eject button fails, first 

turn off the power 

to the computer 

and then insert a small, thin rod (such as a straightened paper 

clip) into the emergency eject mechanism opening and press firmly to eject the 

disc.

volume control:

 Use the volume control to adjust audio volume. Turning the 

control to the right increases the volume. (Lower the volume before you play a 

disc to protect your hearing and speakers.)

LED indicator:

 The DVD-ROM drive features an LED indicator light on the 

front panel. Various operations are indicated as per the following table:

disc tray

headphone jack

volume 

eject button

LED indicator

emergency eject

mechanism opening

16X DVD-ROM Drive

control

Installation Guide

Caution: Do not use the emergency eject mechanism when the LED 

indicator is lit or flashing or you may seriously damage the disc or 

the DVD-ROM drive.

®

DV-516E

DVD 16X_short.fm  Page 1  Wednesday, November 27, 2002  11:44 AM